Fusion Splicer Fujikura 62S+
sales team
Fujikura 62S+ Fiber Optic Fusion Splicer provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment models Fujikura 70S+, Fujikura 62S+ includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the device ensures a high level of productivity.
The 62S+ is also equipped with Bluetooth technology. This allows the splicer to actively communicate with Bluetooth enabled fiber preparation accessories making maintenance of fiber preparation tools easier than ever!
Battery capacity is 200 splices/shrinks. The carrying case doubles as a built-in or mobile workstation and makes splicing easier than ever.
Fujikura 62S+ Fiber Optic Fusion Splicer is compatible with Fujikura CT-50A Fiber Optic Cleaver and Fujikura CT-08A Fiber Optic Cleaver (not included).
Features
- Bluetooth wireless communication
- 5,000 splices electrode life
- 23 second tube heating time with standard sleeves
- Fully ruggedized for shock, dust and moisture
- Li-ion battery with 200 splices/shrinks per charge
- Internet software upgrades
- Multi-function carrying case with integrated workstation
Technical Specifications
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651.1), DS (G.653), CS (G.654), NZDS (G.655 & G.656) and Erbium-doped fiber |
| Cladding Diameter | 80 μm to 150 μm |
| Coating Diameter | 100 μm to 1,000 μm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards |
| Splicing Time | ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core axis alignment data |
| Storage of Splice Result | Last 10,000 results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
| Magnification | 320X for single X or Y view, or 200X for X and Y view |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with power save functions activated |
| Electrode Life | 5,000 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery |
| Terminals | USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15 m/s (34 mph) |
| Operating Conditions | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25N |
| Dimensions, W × D × H | 146 × 159 × 150 mm / 5.75 × 6.25 × 5.9 inches |
| Weight | 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery |
Package Contents
- Fujikura 62S+ Fiber Optic Fusion Splicer — 1 pc.
- BTR-09 Battery — 1 pc.
- DCC-18 Battery Charge Cord — 1 pc.
- ADC-18 AC Adapter — 1 pc.
- ACC-14 AC Cord — 1 pc.
- ELCT2-20A Spare Electrodes — 1 pair
- S21A Sheath Clamp — 1 pc.
- Sleeve Loader — 1 pc.
- USB Cable — 1 pc.
- Alcohol Pot — 1 pc.
- Screwdriver — 1 pc.
- Splicer Carrying Strap — 1 pc.
- Quick Reference Guide — 1 pc.
- Video Instruction Manual — 1 pc.
- CC-24 Transit Case with Carrying Strap — 1 pc.
