Remote Control with Touchpad for CS9100 / CS9200 Navigation Box

No results found for your request.
USD 25.00
In stock
Add to cart
Add to comparison Compare
ID: 813871 0.1 kg
Availability in stock:HKEUCNUA
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock



Remote control unit is designed for car navigation boxes control via radio channel and does not need IR receiver. Remote control is equipped with touchpad.

Remote Control for CS9100 / CS9200 Navigation Box
Technical Specifications

Operation distance, m 5 – 7
Operation frequency, GHz 2,400 – 2,483
Power two AA type batteries
Remote control dimensions, mm 55 × 105 × 19
Touchpad dimensions, mm 40 × 40
Weight (without batteries), g 50

Remote Control for CS9100 / CS9200 Navigation Box
Synchronization Procedure

It is necessary to pair up remote control with car navigation box. In order to perform synchronization you should press and hold Return and Home button for one second and release them. After that LEDs will light up. If LEDs are blinking several times, synchronization has succeeded. If they light up and then fade away, synchronization failed and procedure has to be repeated. Also mis-synchronization can occur.

Signs of mis-synchronization

  • Cursor is moving incorrectly (e.g. you move you finger up and the cursor moves down).
  • Only half of touchpad (top or bottom) is working.
  • Cursor is "running" over the screen.

If you faced one of these problems you should perform synchronization once more. If it does not help, turn navigation box off, remove batteries from the remote control, insert them back and turn navigation box on again. Then perform synchronization procedure.

Repeated synchronization is also necessary:

  • After low batteries replacement.
  • If you remove and insert batteries in the remote control during navigation box operation.
  • If cell phone rang near remote control unit.
  • If you bought new remote control unit or use unit from another navigation box.

Remote Control for CS9100 / CS9200 Navigation Box

  • Element F1
  • Element F10
  • Element F15
  • Phantom SPT-100
  • Phantom SPT-200
  • WEG-160

Note! Navigation boxes shall be equipped with built-in radio receiver.

Remote Control for CS9100 / CS9200 Navigation Box
Package Content

  • Remote control unit
  • 2 AA batteries






comments powered by Disqus
Updating product list