Current clamp meter AX-318 for measuring true RMS value of DC and AC current and voltage. Also measures resistance and frequency. Frequency measurement can be carried out by two means: via test leads or clamp. Fitted with autoranging function and 40 segment analogue bargraph.
Features
- Max. diameter of measured wire Ø 40 mm
- HOLD function
- MAX/MIN function
- Relative measurement function
- Automatic zeroing for DCA measurement
- Diode and continuity test with buzzer
- Frequency measurement via test leads or clamp
- 40-segment analogue bargraph
- Low battery indicator
- Backlit display
- Auto power-off function
Specifications
| Display |
backlit LCD, 3,75 digit (3999 max) |
| DC current |
0,1 A ... 400 A / 600 A / 1000 A |
| Accuracy |
± 3,0% + 5 digits |
| AC current |
0,1 A ... 400 A / 600 A / 1000 A (50-60 Hz) |
| Accuracy |
± 2,5% + 5 digits |
| DC voltage |
1 mV ... 4 V / 40 V / 400 V / 600 V / 1000 V |
| Accuracy |
± 0,8% + 5 digits |
| AC voltage |
1 mV ... 4 V / 40 V / 400 V / 600 V / 700 V
(40 - 400 Hz) |
| Accuracy |
± 1,2% + 5 digits |
| Resistance |
0,1 Ω...400 Ω / 4 kΩ / 40 kΩ / 400 kΩ / 4 MΩ /
40 MΩ |
| Accuracy |
± 1% + 5 digits |
| Frequency |
1 Hz ... 40 Hz / 400 Hz / 4 kHz / 40 kHz / 100 kHz |
| Accuracy |
± 0,1% + 1 digit |
| Frequency measured via clamp |
0,1 Hz... 40 Hz / 400 Hz |
| Accuracy |
± 0,1% + 1 digit |
| Sampling rate |
2,5 x /s |
| Continuity test |
acoustic signal for R < 40 Ω |
| Safety standards |
CAT II/1000V, CAT III/600V |
| Weight |
330 g |
| Dimensions |
225 x 86 x 32 mm |
| Power supply |
3 x 1,5 V LR03 battery (delivered) |
Standard Equipment
- Set of test leads
- Soft case
- 3 batteries 1,5 V type LR03
|
