Digital multimeter Mastech MY68 allows to measure continuous and alternating current strength, continuous and alternating voltage, resistance, transistors current gain rate, capacitance and frequency. By means of multimeter MY68 one can test diodes and identify electrical wires. Multimeter is powered from 9 V battery of “KRONA” type. Automatic power off system will switch off the device after 40 minutes of its inactivity.
Specifications:
| Measuring number per second |
2 |
| Auto/Manual ranging |
automatic |
| Counts |
3260 |
| DC voltage |
0,1mV/1000V |
| AC voltage |
1mV/750V |
| DC current |
0,1µA/10A |
| AC current |
0,1µA/10A |
| Frequency |
10Hz - 150kHz |
| Resistance |
0,1Ω-32,6MΩ |
| Input resistance |
10MΩ |
| Transistors current gain rate |
up to 1000 |
| Capacitance |
100pF/32,6 µF |
| Conductivity wire identification |
≤ 25Ω |
| Diode, transistor test |
yes |
| Automatic power-off |
~ 40min |
| Data Hold |
yes |
| Charge battery indication |
yes |
| Overload indication "1". |
yes |
| Power source |
9V |
| Dimensions |
91 × 189 × 31,5 mm |
|