Navigation System for Toyota, Lexus Based on CS9100

Navigation system for Toyota, Lexus based on CS9100 is a navigation module with RGB video output to be connected to the car built-in navigation system or additional monitor; equipped with external GPS receiver with antenna. Navigation box may be installed into Toyota, Lexus cars with built-in colour display and supports touch-screen navigation function. The navigation block is installed into the car via interface adaptor instead of the built-in navigation. As a result, the user enjoys full emulation of the built-in navigation with the required interface language and maps of the region of interest.*

* Warning: As a result of disabling of the built-in navigation system in Toyota, Lexus cars date and date-related service reminders will not be shown.

The navigation system supports the software from Navitel, IGo2006, IGo8, Garmin etc. If a new version of the navigation program is released, it can be easily updated as the navigation device is installed into the specially provided place with direct access to SD card.

For models that do not have touch-screens, a remote control with touch pad is used. The compatibility with any additional monitor with composite input is the main advantage of the device.

Please, take into consideration that in order to install CS9100 car navigation system into Toyota, Lexus cars (after model year 2006) one needs additional equipment: GVIF interface for Lexus.

Features

• Stereo output
• External GPS antenna with MCX connector and magnetic holder
• Remote control with touch pad
• Interface adaptor supporting touch screen

Specifications of the navigation box for Toyota, Lexus based on CS9100

• CPU: Samsung 2240 ARM9 400 MHz
• OSLanguageLocalization: WIN CE 5.0Eng.Rus.(Eng.)
• Memory: Nand 64 MB, SDRAM 64 MB
• Memory card: MMC, miniSD, SD, SDHD up to 16 GB (SDHC depends on the manufacturer)
• Video Out:
  • RGB 480 x 234 (according to the firmware)
  • RGB 400 x 234 (according to the firmware)
• Video Out: 1 x RCA NTSC 3.58 MHz
• Video Input (Optionally) : 1 x stereo jack 3.5 mm
• Audio Out:
  • 1 x RCA stereo 0,25 W
  • 1 x mono jack 3.5 mm (for the speaker)
• USB Host: 1 x Type A (for external devices)
• USB Device: 1 x Mini USB (deactivated)
• Control:
  • 1 x Remote control with a touch pad
  • Touch screen (via USB controller or cable for multimedia receiver) *1
  • Onboard control devices (Adapter for Toyota, Lexus) *2
• GPS:
  • MTK MT3329T
  • Channels: 66
  • Frequency: L1 1575.42 MHz
  • Sensitivity -165 dB
  • Reacquisition: 1 s
  • Protocol: NMEA0183 V3.01: GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s), (additionally GLL or MTK NMEA Command)
  • HotWarmCold start: < 12830 s
  • Antenna: SMA active (cable length 5m)
  • Power supply: 10~30 V DC
  • Main board dimensions: 160 x 110 x 26 mm
  • Weight: 1,130 kg

*1 -The USB controller and cables for multimedia receivers are not included in the package
*2 - Adapter for Toyota, Lexus is being sold only in the package with a navigation block

By means of additional cables: C-NET, PA-AVI, PA-RGB1, PA-RGB2, JVC-TC1, PI-RGB1, AP-RGB1, KEN-RGB1, Audiovox, Elead, Fujitsu Ten the user can connect the navigation box CS9100 to AV recievers (Clarion, Panasonic, Pioneer, Alpine, Kenwood, Audiovox, Elead or Fujitsu Ten with built-in touch screen) to enjoy touch pad navigation control and watch images.

Internet connection (Optional)

Connect Huawei E200 modem to CS9100 navigation box to gain wireless Internet access. Huawei E220 3G HSDPA USB wireless modem (Mobilink Edition) supports the majority phone data standards, including HSDPA / UMTS 2100MHz, GSM / GPRS / EDGE 900/1800/1900MHz.

Package Contents

• Car navigation module based on CS9100 - 1 pc
• Interface adaptor for Toyota, Lexus - 1 pc