Currency :
en es ru ua
Repair EquipmentMeasuring EquipmentDigital OscilloscopesATTENDigital Storage Oscilloscope ATTEN ADS1102CM
Buy Digital Storage Oscilloscope ATTEN ADS1102CM at our specialized web shop

Digital Storage Oscilloscope ATTEN ADS1102CM

Buy Digital Storage Oscilloscope ATTEN ADS1102CM
ID:818653
Weight:5 kg
Warranty :24 months
 
 

ATTEN ADS1102CM is a digital storage oscilloscope with top performance and various advanced functions. It has 2 channels, 100 MHz bandwidth, sampling frequency of 1 GSa/s and 2Mpts memory depth.

Features

  • 1GSa/s sampling rate and 50 GSa/s equivalent sampling rate
  • 2 Channels
  • 5.7" Color LCD
  • 12 menu languages - English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian, Arabic
  • Memory Depth: 40Kpts/2Mpts
  • Trigger types: Edge, Pulse Width, Video, Slope, Alternative
  • Unique digital filter function and waveform recorder function
  • Support Pass/Fail function.
  • Thirty two parameters Auto measure function.
  • Save/recall types: setups, waveforms, CSV file, picture
  • Support Multilingual On-line help system
  • Adjustable waveform intensity and grid brightness
  • Easyscope Software
  • Standard Configuration Port:
    • USB Host: Support USB flash driver save/recall function and update firmware;
    • USB Device: Support PictBridge compatible printer and support PC remote control;
    • RS232, Pass/ Fail output.

Comparative Specifications for ATTEN ADS1000CM/C Series Digital Storage Oscilloscopes

Model ADS1152CM ADS1102CM ADS1062CM ADS1042CM ADS1022C
Bandwidth 150 MHz 100 MHz 60 MHz 40 MHz 25 MHz
Sampling Rate 1 GSa/s 500MSa/s
Equivalent Sampling Rate 50 GSa/s
Memory Depth Single Channel: 40Kpts/2Mpts; Double Channels: 20Kpts/1Mpts 4Kpts
Rise Time <2.3ns <3.5ns <5.8ns   <14ns
Input Impedance 1M? || 13pF
Sec/div Range 2.5ns/div-50s/div 5ns/div-50s/div   25ns/div-50s/div
Scan: 100ms-50s/div
Display Color LCD (320×234)5.7" LCD

ATTEN ADS1102CM Digital Storage Oscilloscope Technical Specifications

Input
Input Coupling AC, DC, GND
Input Impedance DC: 1M? ± 2% || 17pF ± 3pF
AC: 1.2 M? ± 2% || 17pF ± 3pF, < =100mV/div
1.0 M? ± 2% || 17pF ± 3pF, >100mV/div
Maximum Input Voltage ± 400V PK-PK CATI
Ch to Ch Isolation
(Both channels in same V/div setting)
> 100:1 at 50 MHz
Probe attenuator 1X, 10X
Probe attenuator 1X, 10X, 100X, 1000X
Horizontal System
Real Time Sampling Rate 2CH: 500MSa/s
Equivalent Sampling Rate 50GSa/s
Measure Display Modes main, window, window zoom, scan, x-y
Timebase Accuracy ±100ppm measured over 10 ms interval
Time Window 12 Divisions
Horizontal Scan Range 2.5ns/div-50 s/div
Scan: 100 ms/div-50 s/div (1-2.5-5 sequence)
Vertical System
Vertical Sensitivity 2 mV-10 V/div at input BNC(1-2-5 order)
Channel voltage offset range 2 mV-200mV: ±1.6V
206mV-10V: ± 40V in Fixed Gain Ranges & Variable Gain Ranges
Vertical Resolution 8 bit
Channels 2
Analog Bandwidth (at input BNC) 100 MHz
BW Flatness DC-10% of rated BW: ±1dB
10%-50% of rated BW: ±2dB
50%-100% of rated BW: ±3dB
Lower frequency limit (AC -3dB) ≤ 10Hz (at input BNC)
Noise: Pk-Pk for 3K record ≤ 0.6Div for average of 10Pk-Pk readings in fixed gain settings.
< = 0.7 Div for average of 10 Pk-Pk readings, Variable gain settings
SFDR including harmonics ≥ 40dB
DC Gain Accuracy < ± 3.0%: 5mV/div to 5V/div in Fixed Gain Ranges
< ± 4.0%: typical for 2mV/div and Variable Gain Ranges
DC Measurement Accuracy:
All Gain settings ≤100mV/div
± [3%X (|reading|+|offset|) +1% of |offset| +0.2div+2mV]
+0.2div+2mV]
DC Measurement Accuracy:
All Gain settings >100mV/div
± [3%X (|reading|+|offset|) +1% of |offset| +0.2div+100mV]
Rise time, typical (using 500ps pulse) <3.5ns
Math operation +,-, *,FFT
FFT Window mode: Hanning, Hamming, Blackman, Rectangular
Bandwidth limiter 20MHz ± 40% Typical (Note: BW limited below 20MHz ± 40% when using probe X1)
Trigger System
Trigger Types Edge, Pulse Width, Video, Slope, Alternative
Trigger Modes Auto, Normal, Single
Trigger Sources Ch1-2, EXT, EXT/5, AC Line
Trigger Coupling AC, DC, LF rej, HF rej
Trigger Level Range CH1, CH2: ±6divisions from center of screen
EXT: ±1.2V
EXT/5: ± 6V
Trigger Level Accuracy (typical) applicable for the signal of rising and falling time ≥ 20ns Internal: ±(0.2 div×V/div)( within ± 4 divisions from center of screen)
EXT: ±(6% of setting + 40 mV)
EXT/5: ±(6% of setting + 200 mV)
Edge Trigger Edge type: Rising, Falling, Rising and Falling
Pulse Width Trigger Trigger Modes: (>,<,=) Positive Pulse Width, (>,<,=)Negative Pulse Width Pulse Width Range: 20ns-10s
Video Trigger Support signal Formats: PAL/SECAM, NTSC
Trigger condition: odd field, even field, all lines, line Num
Slope Trigger (>,<,=) Positive slope, (>,<,=)Negative Slope
Time: 20ns-10s
Alternative Trigger CH1 trigger type: Edge, Pulse, Video, Slope
CH2 trigger type: Edge, Pulse, Video, Slope
Control Panel Function
Auto Set Auto adjusting the Vertical, Horizontal system and Trigger Position
Save/Recall Support 2 Group referenced Waveforms, 20 Group setups, 20 Group captured Waveforms internal
Storage/Recall function and USB flash driver storage function.
Hard Ware Frequency Counter
Reading resolution 6 Bytes
Accuracy ± 0.01%
Range DC Couple, 10Hz to MAX Bandwidth
Signal Types Satisfying all Trigger signal (Except Pulse width trigger and Video Trigger)
Acquisition System
Sample Types Real time, Equivalent time
Memory Depth Channel Mode Sampling Rate Short memory Long Memory
Single Channel 1GS/s 40kpts No Support
Single Channel 500 MSa/s or lower 20kpts 20 Kpts 2 Mpts
Double Channels 500 MSa/s or lower 20kpts 20 Kpts 1 Mpts
Sample Mode Sample, Peak Measure, Average
Averages 4,16,32,64,128,256
Measure System
Auto Measure
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period, +Wid, -Wid, +Dut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF,LRR,LRF, LFR, LFF
Cursor Measure Manual mode, Track mode and Auto mode
Display
Display Mode Color TFT 5.7" (145mm) diagonal Liquid Crystal Display
Resolution 320 horizontal by 234 vertical pixels
Display Color 64K color
Display Contrast (Typical state) 150:1
Backlight Intensity (Typical state) 300nit
Wave display range 8 x 12 div
Wave Display Mode Point, Vector
Point, Vector Off, 1 sec, 2 sec, 5 sec, Infinite
Menu Display 2 sec, 5 sec, 10 sec, 20 sec, Infinite
Skin Succinct
Screen saver 1min, 2min, 5min, 10min,15min, 30min, 1hour, 2hour, 5hour, off
Waveform Interpolation Sin(x)/x, Linear
Color model Normal , Invert
Language English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian, Arabic
Interface USB Host, USB Device, RS232, Pass/Fail output
Power Supply
Input Voltage 100-240 VAC, CAT II, Auto selection
Frequency Scope 45 Hz to 440 Hz
Power 50VA Max
General Characteristics
Dimension (L × W × H), mm 305 × 133 × 154
Weight 2.3 kg
comments powered by Disqus
In your cart: 0 items
 
Sales Department:
Tel: +852 397 33 882
Tel: +1 323 7044552
Tel: +52 55 1163 8901
Tel: +55 61 3717 2121
Support
Sales Chat
FAQ
Forum
Tech Support
 
 
 
© 2002-2014 GsmServer Team