Cyclone Box is a flash and service tool for the latest Nokia BB5, DCT-L, DCT4, DCT4+ cell phones. Cyclone Box is supplied with 126 Nokia service cables.
Updates:
Cyclone Box (2009-10-26)
Added support for new ASIC 3168 phones/versions. Cyclone
Box supports the
following phones:
RH-86 2610 v07.04a
RH-87 2610b v07.04a
RM-258 2760 v06.82
RM-258 2760 v07.60
RM-259 2760b v06.82
RM-259 2760b v07.60
RM-298 2630 v07.60
RM-298 2630 v57.20
RM-299 2630b v07.60
RM-299 2630b v57.20
RM-340 2600c v06.82
RM-340 2600c v07.60
RM-341 2600c-b v06.82
RM-341 2600c-b v07.60
RM-391 2760h v05.45
RM-392 2680s v06.17
RM-392 2680s v56.17
RM-393 2680s-b v06.17
RM-393 2680s-b v56.17
RM-394 1680c v06.82
RM-394 1680c v07.60
RM-395 1680c-b v06.82
RM-395 1680c-b v07.60
RM-438 7100s v05.22
RM-438 7100s v05.41
RM-438 7100s v06.31
RM-438 7100s v06.32
RM-439 7100s-b v05.22
RM-439 7100s-b v05.41
RM-439 7100s-b v06.31
RM-439 7100s-b v06.32
RM-512 2330c v06.46
RM-512 2330c v06.75
RM-512 2330c v08.20
RM-513 2330c-b v06.46
RM-513 2330c-b v06.75
RM-513 2330c-b v08.20
RM-514 2320c v06.75
RM-514 2320c v08.20
RM-515 2320c-b v06.75
RM-515 2320c-b v08.20
RM-519 2720f v08.20
RM-520 2720f-b v08.20
RM-543 2323c v06.75
RM-543 2323c v08.20
RM-544 2323c-b v06.75
RM-544 2323c-b v08.20
Cyclone Box (2009-09-11)
Added unlock/relock/autolock support for DCT4+ Asic 3168 phones.
Supported models/versions:
7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20
Unlock is free
First standalone solution (without Internet)
Added new service "Super DCT4"
To perform ASIC 3168 phones unlock activate box with "Super DCT4" (enables
DCT4/plus IMEI change in the future)
The activation is done automatically in "Credits" tab and costs 50 credits (100
credits come with a box, if the user had not spent all logs on DCT4 RPLs, the
activation is free)
Fixed Nokia BB5 booting for 5800, N97, 5220 and others
Fixed problem of the box hanging during BB5 boot procedure
Inverted a meaning of "Repower on boot" button: now BB5 phones are repowered during the boot by default (more stable operating with dead / stuck / unbootable
phones)
Fixed box stability during 1208 flash and CP extract, no more "Failed to set Flashbus baud"
General improved FBUS Stack stability
Code revised - Small speed improvement during BB5 TX2 Flashing
Introduced new BB5 loaders, adds support for new flash chips. Improved speed
during flashing RAP3v3 phones with "slow" Samsung flash chip - 00ec2208
(includes 5200, 5310 etc.)
Old updates included: BB5 RAPIDO NCK Calculator and DCT4Plus Unlock patches
released before (after installer):
RM-392 2680 v6.17
RM-393 2680b v6.17
RM-392 2680 v5.28
RM-393 2680 v5.28
RM-362 5000d v6.31
RM-363 5000db v6.31
Cyclone Box pre beta
Added unlock support for BB5 Rapido SL2 phones - 5800, N96, E75 etc.
Added INI selection for BB5 phones flashing
Redesigned GUI
Fixed other major bugs
New DCT4Plus unlock/relock
Added unlock/relock support for new DCT4Plus models: 2680 v06.31, 2680b v06.31, 5000d v06.17, 5000d-b v06.17.
Nokia BB5 unlock
Added SP-Unlock support for Nokia BB5 models (unlock, SP Rebuild) for RAP3Gv2 PA_SL / RAP3Gv3 PA_SL / RAP3Gv3 PA_SL2 / RAPIDO PA_SL / RAPIDO PA_SL2
Added SX4 bypass for PA_SL2 unlock (if necessary)
Launched SX4 Online Service, which includes the latest BB5 Rapido SL2 models
support for Cyclone Box users. It works on both: FBUS and USB.
Support for DCT4+ New security (2009.03.26)
Direct unlock (no downgrade, etc) supported for DCT4+ new security models:
USB BUS power only, current in the idle mode: 55mA
World's first flexible configuration via software. TX2 pin can be
used on any RJ48 output i/o pin.
Built-in 10 pin diagnostic service for phone's damage measurement via voltage, current, frequency, STI BUS
(World's first)
High speed flasher, real BUS speed up to 10-11 Mbit, when 2 data lines
are used
Compatible with UFS/JAF pinout
Switchable VPP: external or internal signal generation; high speed flash/erase
Advanced self-testing system
Support for FLASH BUS and USB connection with Nokia phones
Built-in secure smart-card
No conflicts occur with other devices, as Cyclone Box uses it's own
drivers for Smart Card and FTDI
100 ASK-RPL credits are included into Cyclone Box pack free of
charge to enable RPL calculation for Nokia DCT4 and DCT4Plus. The user does not wait ASK-RPL online calculation.
JAF with PKey-V (No Cables) Fastest Nokia DCT-3, DCT-4, DCT-L unlocker/flasher on the market. BB5/APE phones flashing and BB5+ unllock supported. Now with Windows Vista support.
Check availability
Boxes and Dongles
English
