SE Tool Server Logs

Logs to remote server for Sony Ericsson DB2020 phones flashing / debranding / repairing / unlocking

Updates:

• Added free, standalone, no TestPoint, no additional expensive "TP cables" alternative bypass method for following chipsets: db201x cid52, db2020 cid52/cid53, pnx5230 cid52/cid53
• All is needed – the TEST SIM CARD (or OPERATOR card)
• Fixed GDFS write problem in db201x brown phones.
• Added support for loader inside phone (for quick patch/etc operations using new alternative bypass method) - for that, run "executor" in phone (menu->games), then check in settings
• "use preloader security bypass" and then do needed operation.

Supported phones:

Supported CID's 49/50/51/52/53.

K800, V630, K610, Z610, K790, W710, W850, Z710, M600, M608, W950, W958, P990

Unlock cost:

To patch for unlock / IMEI change DB2020 CID49/51 you still need 1 log.
To patch for unlock / IMEI change DB2012 CID50/51 you still need 1 log.
To permanent unlock DB2020 CID 49/51/52 still costs 7 logs.
To permanent unlock DB2012 CID50/51 still cost 4 logs.
To permanent unlock DB2012 CID52 still needs 7 logs.
To permanent unlock PNX5230 CID52 (Z310) still needs 7 logs.
To permanent unlock / IMEI change PDA with OLD SECURITY is still free.
To permanent unlock PDA with NEW SECURITY still cost 4 logs.
To permanent unlock CID53 phones (P1, W960) still needs 7 logs.
To permanent unlock A2 phones (W910, K850, etc) still needs 7 logs.
To permanent unlock / IMEI change any DB2000 phone is still free.
To permanent unlock / IMEI change any DB2010 phone is still free.
To permanent unlock any CALYPSO LITE phone is still free.

SE Tool software version required: v0.91380079 or higher

Please follow the procedure below:
FOR UNLOCK PROCEDURE
Go to settings tab:
Check
1) 'use server for csca unlock/flash'
2) 'enable alternative security bypass'
Go to Sony-Ericsson Tab:
Press UNLOCK/Repair

FOR DECUSTOMISE + UNLOCK PROCEDURE
1) chose files you want from support and add files (Sony-Ericsson tab)
2) check 'use server for csca unlock/flash' (settings tab)
3) check 'enable alternative security bypass' (settings tab)
4) check 'complete phone' (settings tab)
5) check 'unlock after flash' (settings tab)