Affordable unlock solution
Official Smart Unlocker website
Smart Unlocker is a product by Smart-Clip team (GsmServer).
Smart Unlocker is a cheap unlock cell phones solution that came as an alternative for those who choose to buy Smart-Clip only for unlocking and have to save long before they purchase it.
As a low price unlock gsm cell phones solution, Smart Unlocker becomes a must-have for every unlocker on all
continents of the world.
It unlocks phones within seconds.
Smart Unlocker is a simple (like Smart-Clip) standalone device that removes SP/SIM/phone lock and resets Security/User code in phones.
Device is upgradable via internet in real time.
The function of Unlocker is described by its name - it is meant for unlocking phones only
Currently supported popular phone models
The current list of supported models includes most of the models supported by Smart-Clip. Versions that
require use SmartMoto during unlock procedure are not currently supported.
- Cxxx: C975, C250, C260, C266, C330, C331, C332, C333, C334, C335, C336, C350, C350L, C350V, C353, C359V, C370, C450, C450L, C550, C650, C350L-R312ULS_G_09.10.2CR, C385, C380, C115, C236, C268, C335V, C116, C117, C155, C156 and others
- Exxx: E1000, E380, E370, E396, E398, E365, E378i and others
- Vxxx: V980, V150, V151, V300, V303, V400, V500, V525, V551, V600, V220, V180, V505, V171, V975 (ver R245_xxx), V170, V1050 and others
- Vxx OLD: V60, V66, V60i, V66i, V70 and others
- Vxx NEW: V3, V80, V80 (incl. R37_G_0E.03.26R) and others
- Txxx: T280, T720, T720i, T722i, T720-T720_G_05_08_81R , T721, T280i and others
- Axxx: A1000, A835, A920, A925, A845, A835, A630 and others
- Sendo Seria S2xx/S3xx/P2xx/M5xx/S6xx: SND200, SND230, P200, P230, M550, S600, SND800 and others
- List of all supported cell phone models
Package contents
- Smart Unlocker device
- Cables for c,v series
- Battery connector
Buy DC Power Adapter
Sendo snd2xx/snd3xx/snd5xx/snd6xx/snd8xx unlocking procedure
- Power off the phone
- Connect clip to the phone using RJ45 cable (pinouts below)
- Press UNLOCK button
- Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
- E/G led will glow green on success.
When you unlock Sendo phone use either fully charged phone battery OR power supply from Smart Unlocker. Don't use them both at the same time!
If you use power supply from Smart Unlocker, make sure current is not less than 300mA, otherwise not all data will be properly recorded to the phone.
V18x/V22x/C65x/C38x (newer versions), C975/V980/E1000 (Boot Loader 0.6.1.2) unlocking note.
Unlocking newer versions of V18x/V22x/C65x/C38x or C975/V980/E1000 (Boot Loader 0.6.1.2) may require additional user intervention.
It may happen that E/G led still blinks after display turns off - it means that you have to turn the phone ON manually within 2-3 seconds after display turns off; alternatively you can try to unlock this newer version of V18x/V22x/C65x/C38x with battery charger on.
Unlock procedure for A920/A925/A1000
- Power the phone on.
- Connect the phone to a powered clip. Phone display should give "USB cable connected" message.
- Press UNLOCK button on the clip.
- Phone reloads. Within 5-10 seconds phone display gives "Waiting for PST" message.
- Press A and B keys simultaneously in upper part of the handset. The phone enters boot mode (if you don't press these 2 keys during "Waiting for PST" message, the clip will give red E/G led and you will have to start with step 1 again).
- After A and B keys have been pressed E/G green led will blink and phone reboots. Meanwhile E/G will give frequent green blinking and phone will turn on.
Do not disconnect cell phone from Smart Unlocker while green led indicator blinks!
- Green E/G led glows. The cell phone is unlocked.
Axxx/Exxx/Vxxx unlocking note
Don't unplug cable right after phone reboot, wait until E/G led stops blinking!
E396/E398 unlocking note
Remove flash card from phone before unlocking
C115/C116/C155/C156/E365/V171 unlocking procedure
- Power off the phone
- Connect clip to the phone using RJ45 cable (pinouts below)
- Press UNLOCK button
- Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
- E/G led will glow green on success *
* After successful unlock (green led on) phones with inserted sim card may ask for PCK or NCK code. Enter 00000000 ("zero" 8 times)
Package Includes:
Warranty
6 months
Please note that cables are the accessories and are not covered by warranty |
Buy now
Boxes and Dongles
English
Deutsch
