Medusa Box v.2.4.1 is out!

Medusa Box v.2.4.1 is out!

We have added boot repair via USB and small TP for LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for Huawei G510-0010 and Y301-A1 (MetroPCS)!

Medusa Box v.2.4.1 Release Notes:

Added support for the following models:

  • LG D370 - added Dead Boot Repair via USB
  • LG D370TR - added Dead Boot Repair via USB
  • LG D373 - added Dead Boot Repair via USB
  • LG D373EU - added Dead Boot Repair via USB
  • LG D375 - added Dead Boot Repair via USB
  • LG D410 - added Dead Boot / Device Repair via USB
  • LG D410H - added Dead Boot Repair via USB
  • LG D410NH - added Dead Boot Repair via USB
  • Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
  • Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)

To repair mentioned above devices via USB, please follow the next three steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

All pinouts and Repair procedures are described in the manual ("Help" button in Software).

Download Medusa Box v.2.4.1

Chat with us
English Online Español Online Português Online Tech Support Online
Sales chat
 English online
 Español online
 Português online
 Tech Support online
Contacts
Phone:
Email:
Compare
No items in compare list
Sales chat
Contacts
Compare