Car Camera Connection Cable for Mitsubishi/Fiat Cars of 2013-2018 MY
Cable for rear view camera connection in Mitsubishi cars of 2013-2018 MY Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires. You will also be able to activate and set up the active parking guidelines function (PAS) in the service menu of the monitor.
Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 8 pin socket. After connection all OEM functions which work using this socket are preserved due to transit type of connection.
Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.
Camera Connection Cable
|ASX||2013||–||Connect 7" Smartphone Link Display Audio
Link System 6.1''
MMCS SD CD 7'' Mitsubishi Multi Communication System
(NR-242, E-11, E-12, E-13, E-14, E-15, E-17, J-11, J-12, J-13, J-14, J-15,
J-17, N-11, N-12, N-13, N-14, N-15, N-17, W-11, W-12, W-13, W-15, W-17)*
|Lancer Evolution X|
*Various MMCS SD CD 7'' Mitsubishi Multi Communication System models, usually found in the top right corner of the car radio.
|Fullback||2016||–||Connect 7" Smartphone Link Display Audio
Link System 6.1''
MMCS SD CD 7''
(E-11, E-12, E-13, E-14, E-15, E-17, N-11, N-12, N-13,
N-14, N-15, N-17, W-11, W-12, W-13, W-15, W-17)*
|Fullback Double Cab|
Various MMCS SD CD 7'' models, usually found in the top right corner of the car radio.
Note! Only cameras in NTSC format are supported.
The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.
|Cable for OEM Head Unit is compatible with the following models of Cars||
|Cable for OEM Head Unit is compatible with Head Units|
|Cable for OEM Head Unit is compatible with Camera Connection|