Cables and Adapters for Apple

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 11 Pro / 11 Pro Max. Works with JC V1S Programmer

This flex cable is intended for non-removal repair of Face ID on iPhone 11 Pro / 11 Pro Max. To be used with V1SE/V1S Pro programmer and JC V1S Face ID Read / Write Board.

This board is used for reading the original iPhone Face ID data and writing these data to the replacement FPC cable. Used with V1S/ V1SE/V1S Pro programmer only.

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 11. Works with JC V1S Programmer

This flex cable is intended for non-removal repair of Face ID on iPhone 12 Pro Max. To be used with V1SE/V1S Pro programmer and JC V1S Face ID Read / Write Board.

This flex cable is intended for non-removal repair of Face ID on iPhone 12 mini. To be used with V1SE/V1S Pro programmer and JC V1S Face ID Read / Write Board.

This JCID Flex Cable is intended for replacing the faulty battery flex cable on iPhone 12 Pro Max. Works with JC V1S Programmer

Intended for the cases when True Tone / Face ID functions are disabled on an iPhone due to faulty original FPC flex cable.

This adapter is intended for fault analysis and reading data of Type-C tail plugs.

With IP-Box 2 and SPI PCB you can read / write / fix base SPI Flash IC (for example, fix iTunes 1.16...error and much more)

Naviplus PRO 3000S module for iPad 4

Fast change of the following underlying data: SN, country, Bluetooth address, Wi-Fi address.

JC Pro 1000S 32/64 Bit NAND Module is a new JC Pro 1000S PCIE module able to work on JC software platform and on JC Pro1000S programmer.

JC Pro 1000S Module for iPhone 8 / 8 Plus / X is a new JC Pro 1000S PCIE module able to work on JC software platform and on JC Pro1000S programmer.

Naviplus PRO 3000S 2 in1 Adapter for iPad 5 Air / iPad 6 Air 2

Easy 5 / 6 for iPad 5 Air / iPad 6 Air 2 NAND Fixture allows you to work with iPad Air / Air 2 without removing NAND flash memory.

Naviplus PRO 3000S Adapter for iPhone 8 / 8 Plus / X allows you to read the firmware data of the original screen and write the information to the replacement screen.

DCSD Alex Cable allows you to write data to SysCfg partition of iPhone NAND memory.

Magico DCSD Cable allows you to write data to SysCfg (System Configuration) partition of iPhone NAND memory.

This PCB board is intended for JC V1 Programmer and allows you to service iPhone 11 / 11 Pro as well.

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

Intended for JC Dot Matrix Detection Module and JC Pro1000S.

Intended for Magico iFace Tool.