IP-Box 2 + Hot Air Rework Station Accta 301 (110V)
IP-Box 2 is a solution for repairing and servicing iPhones and iPads *.
This high-speed programmer is for advanced users, proficient in iPhone/iPad IC chip removal. After the chip is removed you can read/write/repair it with the help of IP-Box 2 IC Reader.
IP-Box 2 Features:
- Hard Disk Repair, data extraction, Hard Disk testing
- Backup/Write Hard Disk Data ( supports Full Flash Reading/Writing/Erasing)
- Update iPhone Hard Disk (upgrade memory)
- Read/Write/Fix SPI Flash IC
- Backup/Write fingerprint eeprom
- iPhone/iPad Info Change (SN, WIFI Mac Address, BT Mac Address, Local, Modem)
- Detects ID, type, capacity and other information
IP-Box 2 Package Content:
- 1 X IP-BOX 2
- 1 X LGA52 / 60 a test socket (fixture)
- 1 X SPI flash test socket (PCB connection)
- 1 X EEPROM IC test socket (PCB connection)
- 1 X USB data cable
* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.
Accta 301A – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hor air gun and soldering iron holders, a soldering iron tip and hot air nozzles.
Features
- Ultra-compact device.
- Microprocessor control system.
- Real-time temperature display.
- Allows temperature monitoring when the tip touches with the surface.
- Temperature parameters control using analog adjusting potentiometers.
- Hot air gun overheating protection.
- Soldering iron temperature accuracy ±5 °C.
- Soldering iron linear temperature characteristic.
- Soldering iron heat-up time up to 12 seconds.
- Hot air gun auto switch-off.
- Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
- FCC certified.
- The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
- CE certified.
Technical Specifications
Power Consumption | 450 W |
Soldering Iron Power | 50 W |
Hot Air Gun Power | 350 W |
Soldering Iron Temperature Range | 80 – 480 °C |
Hot Air Gun Temperature Range | 80 – 480 °C |
Soldering Iron Heating Element | ceramic |
Hot Air Gun Heating Element | metal heating core |
Air Pump Type | turbine blower |
Air Capacity | 120 l/min |
Power Input | 110 V, 60 Hz |
Main Unit & Hot Air Gun Holder Size | 190 × 194 × 103 mm |
Main Unit Size (without holder) | 128 × 194 × 100 mm |
Weight | 2.3 kg |
The default plug type is Type A. In case you need a different plug please contact our manager.
Video
Package Contents
- Accta 301A Hot Air Rework Station – 1 pc.
- Hot Air Gun Holder – 1 pc.
- Hot Air Nozzles – 3 pcs.
- Soldering Iron – 1 pc.
- AOYUE T-I Soldering Tip – 1 pc.
- Soldering Iron Holder – 1 pc.
- Tip Cleaning Sponge – 1 pc.
- User's Manual – 1 pc.
Compatible Soldering Tips
Conical Soldering Tips | ||
---|---|---|
AOYUE T-0.5C |
AOYUE T-0.8C |
AOYUE T-B |
AOYUE T-I |
AOYUE T-LB |
AOYUE T-S4 |
AOYUE T-S8 |
AOYUE T-SB |
AOYUE T-SI |
Bevel Type Soldering Tips | ||
AOYUE T-1C |
AOYUE T-1.5CF |
AOYUE T-1.5CM |
AOYUE T-2C |
AOYUE T-2CF |
AOYUE T-2CM |
AOYUE T-3C |
AOYUE T-3CF |
AOYUE T-3CM |
AOYUE T-4C |
AOYUE T-4CF |
AOYUE T-4CM |
AOYUE T-S6 |
AOYUE T-S7 |
|
Chisel Type Soldering Tips | ||
AOYUE T-0.8D |
AOYUE T-1.2D |
AOYUE T-1.2LD |
AOYUE T-1.6D |
AOYUE T-2LD |
AOYUE T-2.4D |
AOYUE T-3.2D |
AOYUE T-3.2LD |
AOYUE T-S3 |
AOYUE T-S9 |
||
Bent Type Soldering Tips | ||
AOYUE T-0.2RB |
AOYUE T-1.8H |
AOYUE T-H |
Knife Type Soldering Tips | ||
AOYUE T-K |
||
Soldering Tips for SMD | ||
AOYUE T-R |
AOYUE T-RT |
Manufacturer
This device was developed and manufactured in Ukraine.
Box is compatible with the following models of Cell phones |
|