Close Filters
Show Filters

Medusa PRO Box + Hot Air Rework Station Accta 301A (110 V)

id: 875129
Medusa PRO Box + Hot Air Rework Station Accta 301A (110 V)
Overview
Description
Specifications
Delivery
Payment
Warranty
Discontinued
Contact
sales team
Overview
Rate product
3 kg 110 V Warranty: 6 months
Medusa PRO Box is a professional programmer, allowing you to work with devices (single or combined into the common chain) through JTAG, USB and MMC interfaces. Accta 301A – dual-channel hot air soldering/desoldering station. Soldering iron power: 50 W, hot air gun power: 350 W, soldering iron temperature range: 80 – 480 °C, hot air gun temperature range: 80 – 480 °C. Read more
Discontinued
Contact
sales team
Discontinued
Contact
sales team
Impossible to estimate the shipping cost
Description

Medusa PRO Box is a professional phone flashing and mobile decoding tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces. The main intended purpose of Medusa PRO Box is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational. Medusa PRO Box Software is a windows application for Medusa PRO Box, provides convenient interface for end user.

Medusa PRO Box - Features:

Medusa PRO - Hardware Features:

  1. Fast USB 2.0 high-speed hardware
  2. JTAG support for ARMv5, ARMv6, ARMv7
  3. Up to 24MHz JTAG speed
  4. Transfer speed via JTAG interface up to 1 MB/s
  5. eMMC support up to MMC 5.0 standard
  6. 1-bit and 4-bit MMC bus modes are supported
  7. Standard 20-pin JTAG interface
  8. Built-in JTAG PIN finder
  9. Built-in USB CCID smart card reader
  10. Built-in RJ45 Multiport, Unibox capable

Medusa PRO - Software Features:

  1. Full-featured professional-grade Medusa PRO software
    Software fully supports all operations (Read, Write and Edit) with any required memory sections through JTAG, USB and MMC interfaces.
  2. Easy and smart Graphical User Interface (GUI), suitable for beginners and for experts
  3. Fast repair of target device with Smart-Repair-Files (SRF)
  4. SRF contains partition data and other necessary data (help files and diagrams)
  5. Data in SRF is compressed (less to download, quicker to work)
  6. Built-in Partition Manager
    Now you can edit and save required for your work partitions, this leads to convenient and easy way to service devices. In addition, with Partition Manager you may open Full Flash file in binary format, edit it and write it back to the device.
  7. Simple per-partition operations (Read, Write, Erase, Edit) of the target storage device
  8. Built-in Smart-Repair-File Constructor with Partition Manager for creating custom SRFs
    SRF file could be taken from the device or read out from Full Flash file in binary format. This feature allows the user (without developer’s assistance) add devices to the list of supported models, which are not officially supported yet. User will be allowed to upload that custom SRF file into separate section of Support Zone for further analysis by developers. If custom SRF file would be recognized as a legitimate and correct, name (or nickname) of the author will be presented in the following update. Thus, user has been given the opportunity to participate in the development of Medusa PRO and became known in certain circles.
  9. Built-in Download manager
    Allows you to download files directly from the software.
  10. NAND, OneNAND, NOR and eMMC storage devices are supported via JTAG interface
  11. NAND, OneNAND and eMMC storage devices are supported via USB interface
  12. eMMC storage devices are supported via MMC interface
  13. Up to 1 MB/s transfer speed via JTAG interface *
  14. Up to 6 MB/s transfer speed via MMC interface with 4-bit bus *
  15. Up to 2.2 MB/s transfer speed via MMC interface with 1-bit bus *
  16. Windows 10 compatible software

Full description of Medusa Pro Box.

Accta 301A – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hor air gun and soldering iron holders, a soldering iron tip and hot air nozzles.

Features

  • Ultra-compact device.
  • Microprocessor control system.
  • Real-time temperature display.
  • Allows temperature monitoring when the tip touches with the surface.
  • Temperature parameters control using analog adjusting potentiometers.
  • Hot air gun overheating protection.
  • Soldering iron temperature accuracy ±5 °C.
  • Soldering iron linear temperature characteristic.
  • Soldering iron heat-up time up to 12 seconds.
  • Hot air gun auto switch-off.
  • Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
  • FCC certified.
  • The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
  • CE certified.

Full description of Accta 301A.

Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
Specifications
Box is compatible with the following models of Cell phones
  • Samsung
  • Huawei
  • Sony
  • LG
  • Motorola
  • Vodafone
  • ZTE
  • Sony Ericsson
Delivery
Payment
Warranty

Customers Feedback

Chat with us
English Online Español Offline Português Offline Tech Support Online
Sales chat
 English online
 Español offline
 Português offline
 Tech Support online
Contacts
Phone:
Email:
Compare
No items in compare list
Sales chat
Contacts
Compare