Z3X Easy-Jtag Plus Full Set + Hot Air Rework Station Accta 301 (220 V)
Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.
Z3X Easy-Jtag Plus - Outstanding features:
- One click device repair
- Boot repair
- Data recovery
- eMMC firmware repair
- Partition management
- eMMC service operations
- SPI memory programming
Z3X Easy-Jtag Plus - Hardware features:
- Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
- Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
- Updated power management subsystem – full digital PWM with ADC control
- Added Micro-USB connector (if additional power required)
- Added VCC and VCCQ switch with overcurrent protection
- Updated USB device interface: USB 2.0 480 Mbps (high speed)
- Integrated ISP engine: Z3X high power pro engine (4 MB/s)
- ISP support 1 and 4 bit* connection
- Added eMMC 8-bit high-speed interface up to 42 MHz
- Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
- Integrated M-PHY* interface
- Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
- Integrated self-test core that excludes 90% faults in production
- Integrated CCID card reader for Z3X Software Use
Z3X Easy-Jtag Plus - Hardware benefits:
- Box to Host PC speed increased up to 40 MB/sec
- JTAG Interface speed increased by 20%
- eMMC 1 Bit ISP Speed increased up to 4 MB/sec
- eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
- eMMC 4 Bit Speed up to 18 MB/sec
- eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
- Compatible with 99% host PC systems and OS
- Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
- Compatibility with most of the popular eMMC sockets (with supplied adapters)
- Plug and Play for Windows OS 8/ 8.1/10
- Full support for Windows XP
eMMC Socket - Features:
- Made from high quality materials
- Over 10K cycles of lifetime performance
- Support for a wide range of eMMC ICs
- High-speed up to 40 MB/sec through 8-bit bus
- EMI resistant design, low noise components
- Integrated power logic (no need for additional power source)
- Surge protection - smart fuse driven (0.5A threshold)
Z3X Easy-Jtag Plus Full Set - Package Content:
- Easy-JTAG Plus Box Hardware
- Z3X preactivated card with EasyJTAG PLUS Activation
- Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
- USB A-B cable
- Adapter set - 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1 year guaranteed free support access
* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.
Accta 301 – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hot air gun and soldering iron holders, a soldering iron tip and hot air nozzles.
Features
- Ultra-compact device.
- Microprocessor control system.
- Real-time temperature display.
- Allows temperature monitoring when the tip touches with the surface.
- Temperature parameters control using analog adjusting potentiometers.
- Hot air gun overheating protection.
- Soldering iron temperature accuracy ±5 °C.
- Soldering iron linear temperature characteristic.
- Soldering iron heat-up time up to 12 seconds.
- Hot air gun auto switch-off.
- Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
- The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
- CE certified.
Technical Specifications
Power Consumption | 450 W |
Soldering Iron Power | 50 W |
Hot Air Gun Power | 350 W |
Soldering Iron Temperature Range | 80 – 480 °C |
Hot Air Gun Temperature Range | 80 – 480 °C |
Soldering Iron Heating Element | ceramic |
Hot Air Gun Heating Element | metal heating core |
Air Pump Type | turbine blower |
Air Capacity | 120 l/min |
Power Input | 220-240 V, 50 Hz |
Main Unit & Hot Air Gun Holder Size | 190 × 194 × 103 mm |
Main Unit Size (without holder) | 128 × 194 × 100 mm |
Weight | 2.3 kg |
The default plug type is EU plug Type F (CEE 7/7). In case you need a different plug please contact our manager.
Video
Package Contents
- Accta 301 Hot Air Rework Station – 1 pc.
- Hot Air Gun Holder – 1 pc.
- Hot Air Nozzles – 3 pcs.
- Soldering Iron – 1 pc.
- AOYUE T-I Soldering Tip – 1 pc.
- Soldering Iron Holder – 1 pc.
- Tip Cleaning Sponge – 1 pc.
- User's Manual – 1 pc.
Compatible Soldering Tips
Conical Soldering Tips | ||
---|---|---|
AOYUE T-0.5C |
AOYUE T-0.8C |
AOYUE T-B |
AOYUE T-I |
AOYUE T-LB |
AOYUE T-S4 |
AOYUE T-S8 |
AOYUE T-SB |
AOYUE T-SI |
Bevel Type Soldering Tips | ||
AOYUE T-1C |
AOYUE T-1.5CF |
AOYUE T-1.5CM |
AOYUE T-2C |
AOYUE T-2CF |
AOYUE T-2CM |
AOYUE T-3C |
AOYUE T-3CF |
AOYUE T-3CM |
AOYUE T-4C |
AOYUE T-4CF |
AOYUE T-4CM |
AOYUE T-S6 |
AOYUE T-S7 |
|
Chisel Type Soldering Tips | ||
AOYUE T-0.8D |
AOYUE T-1.2D |
AOYUE T-1.2LD |
AOYUE T-1.6D |
AOYUE T-2LD |
AOYUE T-2.4D |
AOYUE T-3.2D |
AOYUE T-3.2LD |
AOYUE T-S3 |
AOYUE T-S9 |
||
Bent Type Soldering Tips | ||
AOYUE T-0.2RB |
AOYUE T-1.8H |
AOYUE T-H |
Knife Type Soldering Tips | ||
AOYUE T-K |
||
Soldering Tips for SMD | ||
AOYUE T-R |
AOYUE T-RT |
Manufacturer
This device was developed and manufactured in Ukraine.
Box is compatible with the following models of Cell phones |
|