Z3X Easy-Jtag Plus Full Set + Hot Air Rework Station Accta 301A (110 V)

No results found for your request.
Z3X Easy-Jtag Plus Full Set + Hot Air Rework Station Accta 301A (110 V)
Product evaluation option is available only for those customers, who purchased this product and filled in a questionnaire received by email after purchase.
USD 358.00 USD 328.99
In stock
Add to cart
Add to comparison Compare
ID: 875135 3.1 kg 110 V
Availability in stock:HKEUCNUA
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock

Warranty: 6 month (s)
 

Overview

Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Z3X Easy-Jtag Plus - Outstanding features:

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy-Jtag Plus - Hardware features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus - Hardware benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10
  • Full support for Windows XP

eMMC Socket - Features:

  • Made from high quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection - smart fuse driven (0.5A threshold)

Z3X Easy-Jtag Plus Full Set - Package Content:

  • Easy-JTAG Plus Box Hardware
  • Z3X preactivated card with EasyJTAG PLUS Activation
  • Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
  • USB A-B cable
  • Adapter set - 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
  • 1 year guaranteed free support access

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.

Accta 301A – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hor air gun and soldering iron holders, a soldering iron tip and hot air nozzles.

Features

  • Ultra-compact device.
  • Microprocessor control system.
  • Real-time temperature display.
  • Allows temperature monitoring when the tip touches with the surface.
  • Temperature parameters control using analog adjusting potentiometers.
  • Hot air gun overheating protection.
  • Soldering iron temperature accuracy ±5 °C.
  • Soldering iron linear temperature characteristic.
  • Soldering iron heat-up time up to 12 seconds.
  • Hot air gun auto switch-off.
  • Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
  • FCC certified.
  • The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
  • CE certified.

Technical Specifications

Power Consumption 450 W
Soldering Iron Power  50 W
Hot Air Gun Power 350 W
Soldering Iron Temperature Range 80 – 480 °C
Hot Air Gun Temperature Range 80 – 480 °C
Soldering Iron Heating Element ceramic
Hot Air Gun Heating Element metal heating core
Air Pump Type turbine blower
Air Capacity 120 l/min
Power Input 110 V, 60 Hz
Main Unit & Hot Air Gun Holder Size 190 × 194 × 103 mm
Main Unit Size (without holder) 128 × 194 × 100 mm
Weight 2.3 kg

The default plug type is Type A. In case you need a different plug please contact our manager.

Video

Package Contents

  1. Accta 301A Hot Air Rework Station – 1 pc.
  2. Hot Air Gun Holder – 1 pc.
  3. Hot Air Nozzles – 3 pcs.
  4. Soldering Iron – 1 pc.
  5. AOYUE T-I Soldering Tip – 1 pc.
  6. Soldering Iron Holder – 1 pc.
  7. Tip Cleaning Sponge – 1 pc.
  8. User's Manual – 1 pc.

Compatible Soldering Tips

Manufacturer

This device was developed and manufactured in Ukraine. Flag

Specifications

Box is compatible with the following models of Cell phones
  • Samsung
  • Huawei
  • Sony
  • LG
  • Motorola
  • Vodafone
  • ZTE
  • Sony Ericsson

Tips

Warranty

Payment

Delivery

comments powered by Disqus
Updating product list