Close Filters
Show Filters

Frame Gluing Machine TL-518/PD-318 compatible with Apple Cell Phones, (to separate LCD module, to cut UV glue , frame unsticking function)

id: 861361
Frame Gluing Machine TL-518/PD-318 compatible with Apple Cell Phones, (to separate LCD module, to cut UV glue , frame unsticking function)
Overview
Description
Specifications
Delivery
Payment
Warranty
Discontinued
Contact
sales team
Overview
Rate product
28 kg 220 V Warranty: 6 months
Discontinued
Contact
sales team
Compare
Compare
Discontinued
Contact
sales team
Impossible to estimate the shipping cost
Description

TL-518 is a multifunctional device for display module repair. It combines functions of

  • separator
  • iPhone frame gluing device
  • Samsung frame unsticking device
  • UV glue, OCA and polarizing films removal device
  • device for adhesive heating/softening

How to Use As a Separator

  • Place the display module on the silicone pad on the platform.
  • Turn the separator on. The Power button is from the left side on the front panel.
  • Set the temperature at approximately 100 - 120 °C.
  • To turn on the compressor, press the first button on the right panel.
  • When the separator is heated to the required temperature, take the wire and place it between the glass and the touchscreen. Leaning on the side rails move the wire left and right and pull it at the same time to cut off the glue.

Frame Unsticking in Samsung

  • Place the display module with the frame so that the touchscreen is in front of you.
  • The temperature must be approximately at 70 -90 °C. As soon as the platform is heated to the necessary temperature, unglue the LCD module with the help of mediator or spudger.
  • Turn on the vacuum pump to fix the frame. Press the second red button on the side panel, which is located under the platform on the right/left side respectively.
  • When the platform is heated to the required temperature, use a blade or a mediator to unstick the display module.

UV glue, OCA and polarizing Films Removing

Before using the device, install the blade. The hole for the blade is on top of the platform under three screws.

  • Place the display module on the silicone pad.
  • Turn the compressor on. The Power button is the first button on the right side panel.
  • Turn the device on, and set the temperature approximately at 80 - 90 °C. The controller and the temperature switch are on the right side of the front panel.
  • When the device is heated to the required temperature, pull forward the platform slowly. All glue is to remain on the cutting edge.

Frame Gluing in iPhone

  • Choose a necessary mold.
  • Place the lower part of the mold on the bottom platform of the device, attach the upper part of the mold to the top platform.
  • Turn the device on and set the controller to the necessary temperature (80-140 °C) depending on the type of the adhesive. The controller and the switch of the temperature are on the right side of the front panel.
  • Attach the frame to the display module and place the LCD with its glass up into the lower part of the mold.
  • Use the handle to put down the top of the platform. Press it to the bottom mold and keep it in this position for 15-20 seconds.
  • Carefully lift the upper platform to pull out the module from the mold. The frame gluing process is completed.

LOCA/OCA Glue Heating (softening)

  • Place the display module on the silicone pad.
  • Set the temperature at approximately 50 to 90 °C. The controller and the temperature switch are on the left side of the front panel.

Package Contents

  • Device — 1 pc.
  • Power cable — 1 pc.
  • Spare blade — 1 pc.
  • Silicone pad — 1 pc.
  • Molds for frame gluing in iPhone 4 / iPhone 4S / iPhone 5 / iPhone 5C, iPhone 5S / iPhone 6 / iPhone 6 Plus
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
Specifications
Frame Gluing Machine is compatible with the following models of Cell phones
  • Apple iPhone 4
  • Apple iPhone 4S
  • Apple iPhone 5
  • Apple iPhone 5S
  • Apple iPhone 5C
  • Apple iPhone 6
  • Apple iPhone 6 Plus
  • Apple iPhone SE
Characteristics
  • frame unsticking function
  • to separate LCD module
  • to cut UV glue
Delivery
Payment
Warranty

Customers Feedback

Chat with us
English Online Español Online Português Online Tech Support Online
Sales chat
 English online
 Español online
 Português online
 Tech Support online
Contacts
Phone:
Email:
Compare
No items in compare list
Sales chat
Contacts
Compare