LCD Module Gluing Machine VP-203L for Asus Nexus 7 google, Nexus 7 google NEW (2Gen), Pad Infinity TF700, VivoTab TF600, VivoTab TF810; Acer Iconia Tab A1-810, Iconia Tab A1-811, Iconia Tab B1-710, Iconia Tab B1-730, Iconia Tab W500, Iconia Tab W510, Iconia Tab W700; Lenovo B6000 Yoga Tablet 8, B8000 Yoga Tablet 10; Samsung P600 Galaxy Note 10.1, P601 Galaxy Note 10.1, P605, T110 Galaxy Tab 3 Lite 7.0, T111 Galaxy Tab 3 Lite 7.0 3G, T310 Galaxy Tab 3 8.0, T311 Galaxy Tab 3 8.0 3G, T320 Galaxy Tab Pro 8.4 , T321 Galaxy Tab Pro 8.4 3G, T325 Galaxy Tab Pro 8.4 LTE, T330 Galaxy Tab 4 8.0, T331 Galaxy Tab 4 8.0 3G, T520 Galaxy Tab Pro 10.1 Tablets, (for LCDs up to 13", vacuum, with vacuum pump)

No results found for your request.
USD 2206.16
Buy wholesale and save
Quantity Price
1 2206.16
2 - ∞ 2156.40
In stock
Add to cart
Add to comparison Compare
ID: 858518 80 kg
Availability in stock:HKCNUA
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock

Note! This item is shipped within 7 working days.
Warranty: 6 month (s)
Note! This item is shipped within 7 working days.


Technical Specifications

Voltage 110/220 V
Temperature range 0-400 °C
Platform size 200x300 mm
Device size 400x500x580 mm
Control panel diagonal 4,3"
The vacuum pump is included in the package.
You need to buy the compressor separately.

Operating Principles

  • Connect the compressor to the device.
  • Connect vacuum pump hose and power to the device.
  • Open the chamber door, put the display module there, close the door.
  • Press the red Power button to turn the device on.
  • Set the temperature of 40-60 °C. The temperature settings depend on the model of the display module.
  • Turn the compressor on and set the pressure of 4-6 Bar.
  • Set the time (approximately 3-6 min) depending on the amount of air bubbles.
  • Press the green Start button to launch the gluing process.
  • Warning! Do not open the device when it is working under pressure!
  • The vacuum pump will be turned on automatically.
  • When the gluing process is finished, the device will release the pressure and the platform will automatically slide out.
  • The display and the glass are now bonded. Now the LCD module can be installed in a cell phone, smartphone or tablet.

Package Contents

  • Device — 1 pc.
  • Power cable — 1 pc.
  • Filter for compressor — 1 pc.
  • Vacuum pump — 1 pc.
  • Silicone pad — 1 pc.


LCD Module Gluing Machine is compatible with the following models of Tablets
  • Lenovo B6000 Yoga Tablet 8
  • Lenovo B8000 Yoga Tablet 10
  • Asus Nexus 7 google
  • Asus VivoTab TF600
  • Asus Pad Infinity TF700
  • Asus VivoTab TF810
  • Asus Nexus 7 google NEW (2Gen)
  • Acer Iconia Tab W500
  • Acer Iconia Tab W700
  • Acer Iconia Tab A1-810
  • Acer Iconia Tab B1-710
  • Acer Iconia Tab A1-811
  • Acer Iconia Tab B1-730
  • Acer Iconia Tab W510
  • Samsung P600 Galaxy Note 10.1
  • Samsung T110 Galaxy Tab 3 Lite 7.0
  • Samsung P601 Galaxy Note 10.1
  • Samsung T111 Galaxy Tab 3 Lite 7.0 3G
  • Samsung T520 Galaxy Tab Pro 10.1
  • Samsung T310 Galaxy Tab 3 8.0
  • Samsung T320 Galaxy Tab Pro 8.4
  • Samsung T331 Galaxy Tab 4 8.0 3G
  • Samsung T330 Galaxy Tab 4 8.0
  • Samsung T321 Galaxy Tab Pro 8.4 3G
  • Samsung T311 Galaxy Tab 3 8.0 3G
  • Samsung T325 Galaxy Tab Pro 8.4 LTE
  • Samsung P605
  • vacuum
  • for LCDs up to 13"
Package contents
  • with vacuum pump





comments powered by Disqus
Updating product list