Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock
MT-ZDF220 is the separator machine with an external vacuum pump. The LCD module is attached to the separator platform with the sucked air flow. We recommend using it to separate the broken glass and the display module in up to 7" smartphones/cell phones or tablets.
Fix the wire to the shaft pulley. Then place it between adjusting rollers. (1)
Put the display module on the silicone pad.
Adjust the height of the wire location so that it fits tight to the glass. Check it in the manual mode. (2)
Turn the separator on and pull the Red Button aside. Set the temperature at approximately 100-120 °C. (3)
Adjust the motor speed. (4)
Button position (5)
Button in Up position - the shaft runs clockwise, the wire moves from the left to the right respectively.
Button in Down position - the shaft runs counter-clockwise, the wire moves from the right to the left respectively.
Button in Middle position - the wire moves in both directions. Use the Middle position of the button to separate the glass from the module.
Switch the toggle to turn on the compressor. (6)
When the separator is heated to the required temperature, carefully move the platform forward.
Set the timer. (7)
Pros and Cons:
Pro: Easy to use. This separator securely fixes the display module to the platform even if the glass edges are broken. Due to wire adjustment accuracy the probability to damage the polarizing film is minimal. If the vacuum pump or the separator had broken, you can buy one or the other separately.
Con: Working vacuum pump makes light noise.
Device — 1 pc.
Power cable — 1 pc.
Silicone pad — 1 pc.
Wire 30m — 1 pc.
Semiautomatic LCD Touchscreen Glass Separator Machine is compatible with the following models of Cell phones