Fusion Splicer Fujikura 62S
Fujikura 62S Fiber Optic Fusion Splicer provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment models Fujikura 70S/80S. Fujikura 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity.
Battery capacity is 200 splices/shrinks. The carrying case doubles as a built-in or mobile workstation and makes splicing easier than ever.
- 5,000 splices electrode life
- 23 second tube heating time with standard sleeves
- Fully ruggedized for shock, dust and moisture
- Li-ion battery with 200 splices/shrinks per charge
- Internet software upgrades
- Multi-function carrying case with integrated workstation
|Applicable Fibers||Single-mode SM (G.652 and G.657), Multimode MM (G.651), DS (G.653), NZDS (G.655)|
|Cladding Diameter||80 μm to 150 μm|
|Coating Diameter||100 μm to 1,000 μm|
|Fiber Cleave Length||5 to 16 mm|
|Typical Average Splice Loss||0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS|
|Splicing Time||ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber|
|Arc Calibration Method||Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available|
|Splicing Modes||100 preset and user programmable modes|
|Splice Loss Estimate||Based upon dual camera core axis alignment data|
|Storage of Splice Result||Last 10,000 results stored in the internal memory|
|Fiber Display||X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation|
|Magnification||320X for single X or Y view, or 200X for X and Y view|
|Viewing Method||Dual cameras with 4.7 inch TFT color LCD monitor|
|Tube Heater||Built-in tube heater with 30 heating modes; auto-start function|
|Tube Heating Time||Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves|
|Protection Sleeve Length||60 mm, 40 mm, micro|
|Splice/Heat Cycles with Battery||Typical 200 cycles with power save functions activated|
|Electrode Life||5,000 Arc Discharges|
|Power Supply||Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery|
|Terminals||USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03|
|Wind Protection||Maximum wind velocity of 15 m/s (34 mph)|
|Operating Conditions||0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively|
|Mechanical Proof Test||1.96 to 2.25N|
|Dimensions, W × D × H||146 × 159 × 150 mm / 5.75 × 6.25 × 5.9 inches|
|Weight||2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery|
- Fujikura 62S Fiber Optic Fusion Splicer — 1 pc.
- BTR-09 Battery — 1 pc.
- DCC-18 Battery Charge Cord — 1 pc.
- CT-06A Cleaver — 1 pc.
- ADC-18 AC Adapter — 1 pc.
- ACC-14 AC Cord — 1 pc.
- ELCT2-20A Spare Electrodes — 1 pair
- S21A Sheath Clamp — 1 pc.
- Sleeve Loader — 1 pc.
- USB Cable — 1 pc.
- Alcohol Pot — 1 pc.
- Screwdriver — 1 pc.
- Splicer Carrying Strap — 1 pc.
- Quick Reference Guide — 1 pc.
- Video Instruction Manual — 1 pc.
- CC-24 Transit Case with Carrying Strap — 1 pc.