Fusion Splicer Fujikura 80C
id: 872530
Made in Japan
18 kg 110, 220 V Warranty: 24 months
Core-to-core alignment single fiber splicer for single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing time: 6 s, heating time: 9 s. Read more
Fujikura 80C Fusion Splicer is core-to-core alignment single fiber splicer designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.
Extremely fast splicing takes only 6 seconds, and heating takes only 9 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
- Splices all known types of fibers.
- Fiber core alignment.
- Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
- Highly reduced splicing time – 6 seconds only.
- Highly reduced heating time – 9 seconds only.
- Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
- Battery life increased up to 200 full splicing/heating cycles.
- Rotary color anti-glare LCD 4.73", high contrast and vividness.
- Simultaneous display of X and Y axes.
- May splice SC, LC, MPO connectors.
- Automatic: wind-protective lid, heater, fiber holders.
- Increased water, dust and shock resistance, may be used under severe environment conditions.
- Automatic arc calibration.
- Battery BTR-09 is included.
- New comfortable carrying case, optimized for quick operation start.
- The case may be used as a working table.
- Operation manual is installed into the splicer.
- Software update option.
Technical Specifications
Splicing / Heating | |
---|---|
Typical Splicing Time | 6 sec (for SM) |
Typical Heating Time | 9 sec (for 60 mm sleeves) |
Applicable Fibers | SMF (ITU-T G.652) MMF (ITU-T G.651) DSF (ITU-T G.653) NZDSF (ITU-TG.655) CSF (ITU-T G.654) Fiber with low sensitivity to bends (ITU-T G.657) Erbium-doped fiber |
Cladding Diameter | 80 μm – 150 μm |
Coating Diameter | 100 μm – 3,000 μm |
Fiber Cleave Length | 5 – 16 mm |
Typical Average Splice Loss | 0,02 dB (SMF) 0,01 dB (mmF) 0,04 dB (DSF) 0,04 dB (NZDSF) |
Splice Loss Estimate | core angular offset fiber deformation |
Return Loss | ≤60 dB |
Compatible Protection Sleeves | 60 mm 40 mm micro |
Splicing Modes | 100 user programmable |
Heating Modes | 30 (10 preset + 20 user programmable) |
Internal Memory | up to 2000 splice results and parameters |
Additional Options | |
Mechanical Proof Test | stretching force 1.96 – 2.25 N |
Electrodes lifetime | 3000 cycles |
External Interfaces | USB 1.1, Mini-DIN |
Data Display | |
Screen type | rotary anti-glare LCD |
Screen Size | 4.73" |
Colour | Yes |
Viewing | Yes (2 CMOS cameras) |
Magnification | х200 |
Power Supply | |
Adapter ADC-19 | 220 V AC |
Battery BTR-09 | 4000 mAh |
Battery Cycles | up to 200 splicing/heating cycles |
Operation Conditions | |
Temperature | –10 ~ +50°C |
Altitude above sea level | 0 ~ 5000 m |
RH | 0 ~ 95% |
Max. wind velocity | 34 mph / 15 m/s |
Storage Conditions | |
Temperature | –40 ~ +80 °C |
RH | 0 ~ 95% |
Protection | |
Shock Resistance | height: 76 cm, any surface |
Dust Resistance | dust particles from 0.1 to 500 μm |
Rain Resistance | 10 mm/h for 10 min |
Dimensions & Weight | |
Width | 150 mm |
Length | 159 mm |
Height | 146 mm |
Weight | 2,5 kg (with adapter ADC-18) 2,7 kg (with battery BTR-09) |
Data Sheet
Download Fujikura 80C Data Sheet.
Package Contents
- Fujikura 80C Fusion Splicer — 1 pc.
- ADC-18 power adapter/charger adapter — 1 pc.
- AC power cord — 1 pc.
- BTR-09 detachable battery pack — 1 pc.
- DCC-18 battery charge cord — 1 pc.
- JP-06 J-plate — 1 pc.
- ELCT2-20A spare electrodes — 1 pair
- USB-01 USB cable — 1 pc.
- SL-01 sleeve loader — 1 pc.
- AP-01 alcohol pot — 1 pc.
- SC-01 screwdriver — 1 pc.
- CC-30 carrying case — 1 pc.
- CD with Data Connection Software and Video Instruction Manual — 1 pc.
- Quick reference guide — 1 pc.
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.