Close Filters
Show Filters

Fusion Splicer Fujikura 80C

id: 872530
Fusion Splicer Fujikura 80C
Overview
Description
Delivery
Payment
Warranty
Discontinued
Contact
sales team
Overview
Made in Japan
Rate product
18 kg 110, 220 V Warranty: 24 months
Core-to-core alignment single fiber splicer for single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing time: 6 s, heating time: 9 s. Read more
Discontinued
Contact
sales team
Compare
Compare
Discontinued
Contact
sales team
Impossible to estimate the shipping cost
Description

Fujikura 80C Fusion Splicer is core-to-core alignment single fiber splicer designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.

Extremely fast splicing takes only 6 seconds, and heating takes only 9 seconds.

The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.

Features

  • Splices all known types of fibers.
  • Fiber core alignment.
  • Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
  • Highly reduced splicing time – 6 seconds only.
  • Highly reduced heating time – 9 seconds only.
  • Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
  • Battery life increased up to 200 full splicing/heating cycles.
  • Rotary color anti-glare LCD 4.73", high contrast and vividness.
  • Simultaneous display of X and Y axes.
  • May splice SC, LC, MPO connectors.
  • Automatic: wind-protective lid, heater, fiber holders.
  • Increased water, dust and shock resistance, may be used under severe environment conditions.
  • Automatic arc calibration.
  • Battery BTR-09 is included.
  • New comfortable carrying case, optimized for quick operation start.
  • The case may be used as a working table.
  • Operation manual is installed into the splicer.
  • Software update option.

Technical Specifications

Splicing / Heating
Typical Splicing Time 6 sec (for SM)
Typical Heating Time 9 sec (for 60 mm sleeves)
Applicable Fibers SMF (ITU-T G.652)
MMF (ITU-T G.651)
DSF (ITU-T G.653)
NZDSF (ITU-TG.655)
CSF (ITU-T G.654)
Fiber with low sensitivity to bends (ITU-T G.657)
Erbium-doped fiber
Cladding Diameter 80 μm – 150 μm
Coating Diameter 100 μm – 3,000 μm
Fiber Cleave Length 5 – 16 mm
Typical Average Splice Loss 0,02 dB (SMF)
0,01 dB (mmF)
0,04 dB (DSF)
0,04 dB (NZDSF)
Splice Loss Estimate core
angular offset
fiber deformation
Return Loss ≤60 dB
Compatible Protection Sleeves 60 mm
40 mm
micro
Splicing Modes 100 user programmable
Heating Modes 30 (10 preset + 20 user programmable)
Internal Memory up to 2000 splice results and parameters
Additional Options
Mechanical Proof Test stretching force 1.96 – 2.25 N
Electrodes lifetime 3000 cycles
External Interfaces USB 1.1, Mini-DIN
Data Display
Screen type rotary anti-glare LCD
Screen Size 4.73"
Colour Yes
Viewing Yes (2 CMOS cameras)
Magnification х200
Power Supply
Adapter ADC-19 220 V AC
Battery BTR-09 4000 mAh
Battery Cycles up to 200 splicing/heating cycles
Operation Conditions
Temperature –10 ~ +50°C
Altitude above sea level 0 ~ 5000 m
RH 0 ~ 95%
Max. wind velocity 34 mph / 15 m/s
Storage Conditions
Temperature –40 ~ +80 °C
RH 0 ~ 95%
Protection
Shock Resistance height: 76 cm, any surface
Dust Resistance dust particles from 0.1 to 500 μm
Rain Resistance 10 mm/h for 10 min
Dimensions & Weight
Width 150 mm
Length 159 mm
Height 146 mm
Weight 2,5 kg (with adapter ADC-18)
2,7 kg (with battery BTR-09)

Data Sheet

PDF  Download Fujikura 80C Data Sheet.

Package Contents

  • Fujikura 80C Fusion Splicer — 1 pc.
  • ADC-18 power adapter/charger adapter — 1 pc.
  • AC power cord — 1 pc.
  • BTR-09 detachable battery pack — 1 pc.
  • DCC-18 battery charge cord — 1 pc.
  • JP-06 J-plate — 1 pc.
  • ELCT2-20A spare electrodes — 1 pair
  • USB-01 USB cable — 1 pc.
  • SL-01 sleeve loader — 1 pc.
  • AP-01 alcohol pot — 1 pc.
  • SC-01 screwdriver — 1 pc.
  • CC-30 carrying case — 1 pc.
  • CD with Data Connection Software and Video Instruction Manual — 1 pc.
  • Quick reference guide — 1 pc.
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
Delivery
Payment
Warranty

Customers Feedback

Chat with us
English Online Español Online Português Online Tech Support Online
Sales chat
 English online
 Español online
 Português online
 Tech Support online
Contacts
Phone:
Email:
Compare
No items in compare list
Sales chat
Contacts
Compare