Fusion Splicer SB Scandinavia EasySplicer
SB Scandinavia EasySplicer is a small and handy fiber optic fusion splicer designed for working daily with fiber optic installations. It has a rugged design and may be used for outdoor applications. EasySplicer was designed for all the newcomers in the business: installers of FTTH, electricians (who are getting more and more fiber jobs to do) and TV-installers (merging from Digital-TV to fiber).
EasySplicer is one of the most inexpensive Fusion Splicers on the market. Made in Sweden.
- Used for singlemode and multimode fibers
- Less than 7 seconds splicing time
- Loss estimation
- Fiber fault detection
- Perfect for FTTH installation
|Splicing method||V-grove (cladding alignment)|
|Fiber Types||SMF, MMF 50/125 µm fiber, 250 µm primary and 900 µm secondary coated fiber|
|Fiber Handling||Fiber holders, 2 pairs (250 and 900 µm)|
|Splice Programs||2 pre-defined. SMF & MMF|
|Typical Splice Loss||0.03 dB SMF, 0.01 dB MMF|
|Typical Cycle Time||7 s + 35 s (splice cycle + oven cycle)|
|Sleeve Dimensions||Max 64 mm length, 2-5 mm diameter supported by oven|
|Communication||USB, mini USB plug|
|Memory||Internal: 1 MB
|Monitor||LCD, color, 2,8", 320×240 pixels|
|Operating Environment||0-40°C, max 95% RH|
|Power Sources||External power supply, 6 V, 1.25 A, 100-240 V AC 50-60 Hz
Built-in Li-Ion battery pack
|Splicing Capacity||60 splicing cycles|
- EasySplicer Fusion Splicer — 1 pc.
- Fiber holders (250 μm and 900 μm) — 2 pairs
- Fiber cleaver — 1 pc.
- Fiber stripper — 1 pc.
- Power supply adapter — 1 pc.
- Carrying case — 1 pc.