Car Camera Connection Cable for Nissan with Connect Monitors of 1 / 2 / 3 Generation (24036BG00A)
This modified 24036BG00A cable is used for connecting rear view cameras in Nissan cars with Connect OEM multimedia system of 1 / 2 / 3 generations. Using this cable you will be able to install the aftermarket camera Plug&Play without damaging the car wires.
Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram). After connection all OEM functions which work using this socket are preserved due to transit type of connection.
Note!The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.
Camera Connection Cable for Nissan
Nissan Connect 1 Generation
|Model||Model years||Compatibility conditions||Photo|
|Almera||2011||2014||Cars with OEM 5'' monitor|
Nissan Connect 2/3 Generations
|Model||Model years||Compatibility conditions|
|Altima||2013||–||Cars with OEM 7'' / 8'' monitor|
Note! Only NTSC format cameras are supported.
Nissan Connect 2
Nissan Connect 2 US
Nissan Connect 3
Nissan Connect 3 US
The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.
|Cables for OEM HU is compatible with the following models of Cars||