Rear View Camera Connection Cable for Toyota GEN5 / GEN6

No results found for your request.
USD 30.00
Buy wholesale and save
Quantity Price
1 30
2 29.44
3 28.89
4 28.33
5 27.78
6 27.22
7 26.67
8 26.11
9 25.56
10 - ∞ 25
In stock
Add to cart
Add to comparison Compare
ID: 865684 0.1 kg
Availability in stock:HKCNUA
Product is available in the stock(s) displayed in black.
HK - Product's available in Hong Kong stock
EU - Product's available in Poland stock
CN - Product's available in China stock
UA - Product's available in Ukraine stock



This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays. The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 20 pin socket (see: conection diagram for GEN5, connection diagram for GEN6). After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection. There is a special cable included in the package content, specifically designed for cars that do not have the rear view activation signal in the monitor and were not equipped with rear view camera connection functionality by the manufacturer.

Note! Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.

Camera Connection Cable

Model Model years System Car radio model
From To
Auris 2008 2014 GEN5
Avensis 2006 2009
Corolla 2009 2010
Corolla Verso 2009
Hilux 2006 2011
iQ 2008
Land Cruiser C150 2009 2013
Prius 2009 2011
RAV4 2008
Urban Cruiser 2009
Verso 2009 2011
Verso S 2006
Yaris 2006

Model Model years System Car radio model
From To
Auris 2006 2011 GEN5
B9030 (TNS700)
B9013 (TNS700)
Avensis 2009

Model Model years System Car radio model
From To
Avensis 2009 2011 EU GEN6 B9012
Camry B9018
Hightlander 2012 B9028
Prius B9016 / B9019
RAV4 2013 B9017
Verso 2012 B9020 / B9029

Note! Only NTSC format cameras are supported.

Toyota TNS510 monitor Lexus B9017 monitor

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Camera Connection Cable


Cables for OEM HU is compatible with the following models of Cars
  • Toyota





comments powered by Disqus
Updating product list