Octoplus JTAG PRO Software v.1.4.3 is out!

 

Octoplus JTAG PRO v.1.4.3 is out!

Added Factory Repair (Boot) for Motorola devices based on Qualcomm CPUs.

Added support for Motorola XT1021, Motorola XT1030, Motorola XT1032, Motorola XT1034, Motorola XT1541, Motorola XT1064, Motorola XT1097 and Microsoft Lumia 535 (RM-1090) via eMMC.

Added new general Qualcomm USB loaders for MSM8909, MSM8936, MSM8974, MSM8994, MSM8996.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.3 Release Notes:

  • Motorola Factory Repair feature has been released.
  • You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”).
    This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
    Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting.

  • Added support for the following models via eMMC:
    • Motorola XT1021 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1030 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1032 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1034 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1541 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1064 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1097 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Microsoft Lumia 535 (RM-1090) - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

  • Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations.
  • To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Octoplus JTAG PRO software.

  • Released Pause/Resume operations in Download Manager (“Download *.srf” button in Software).

  • Uploaded new “Live logs” into the Support Area.

  • All pinouts and Repair procedures described in the manual ("Help" button in the software).

Download Octoplus JTAG PRO Software v.1.4.3