Semiautomatic LCD Touchscreen Glass Separator Machine M-Triangel MT-ZDF220, (for LCDs up to 7")
id: 858494
33 kg 220 V Warranty: 6 months
MT-ZDF220 is the separator machine with an external vacuum pump. The LCD module is attached to the separator platform with the sucked air flow. We recommend using it to separate the broken glass and the display module in up to 7" smartphones/cell phones or tablets. Read more
MT-ZDF220 is the separator machine with an external vacuum pump. The LCD module is attached to the separator platform with the sucked air flow. We recommend using it to separate the broken glass and the display module in up to 7" smartphones/cell phones or tablets.
Note! The vacuum pump is not included in the package.
MT-ZDF220 Technical Specifications
Power | 220 V |
Temperature range | 0-400 °C |
Platform power consumption | 250 W |
Platform size | 170x100 mm |
Device size | 520x320x200 mm |
Compatible LCD modules | up to 7" |
Recommended Vacuum Pump Technical Specifications
Model | FY-1H-N |
Power | 110/220 V |
Power consumption | 150 W |
Size | 260x110x200 mm |
MT-ZDF220 Operating Principles
- Fix the wire to the shaft pulley. Then place it between adjusting rollers. (1)
- Put the display module on the silicone pad.
- Adjust the height of the wire location so that it fits tight to the glass. Check it in the manual mode. (2)
- Turn the separator on and pull the Red Button aside. Set the temperature at approximately 100-120 °C. (3)
- Adjust the motor speed. (4)
- Button position (5)
Button in Up position - the shaft runs clockwise, the wire moves from the left to the right respectively.
Button in Down position - the shaft runs counter-clockwise, the wire moves from the right to the left respectively.
Button in Middle position - the wire moves in both directions. Use the Middle position of the button to separate the glass from the module. - Switch the toggle to turn on the compressor. (6)
- When the separator is heated to the required temperature, carefully move the platform forward.
- Set the timer. (7)
Pros and Cons:
- Pro: Easy to use. This separator securely fixes the display module to the platform even if the glass edges are broken. Due to wire adjustment accuracy the probability to damage the polarizing film is minimal. If the vacuum pump or the separator had broken, you can buy one or the other separately.
- Con: Working vacuum pump makes light noise.
Package Contents
- Device — 1 pc.
- Power cable — 1 pc.
- Silicone pad — 1 pc.
- Wire 30m — 1 pc.
Video
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
Semiautomatic LCD Touchscreen Glass Separator Machine is compatible with Cell phones | |
Specification |
|