ATF Gold Box + ATF v3 All-in-1 Ultimate Adapter
ATF Team launched a very special limited edition 5-Year Anniversary ATF Gold Box.
ATF-V3 - All-in-1 Ultimate Adapter for ATF BIG BOX / Nitro / Lighting. This adapter supports JTAG / EMMC / ISP / MMC cards.
ATF GOLD BOX Unique Visual Features:
- High quality gold-plated aluminum case (fingerprint proof)
- Double-coated white front and back panels (stain proof)
- Limited Edition white metallic sticker label
ATF GOLD BOX Special Activations Included:
- 39 ATF JTAG Credits : ATF JTAG Activation
- 49 ATF Network Credits : ATF Network Activation
ATF GOLD BOX Features:
- It's GOLD
- USB 2.0 HS 480mbps
- Fastest JTAG read/write speed for Qualcomm CPUs (30 MHz)
- Built-in VBATT power supply for powering phones during JTAG procedures (4.20V on RJ-45 PIN 1)
- Fastest eMMC read/write speed for any CPU for 1-BIT @ SDR 15 MHz
- Built-in eMMC single power supply (3.00V on RJ-45 PIN 2)
- First in the WORLD eMMC pinout finder for supported CPUs *
- Built-in micro SD card slot for:
- Multi-lingual SD password brute force (ATF is still the ONLY box which can do this)
- SD card "Force Format"
- Samsung SDC unbrick creator using official Samsung TAR.MD5 BL flash files
- SD card low level read/write (Operating System bypass)
- SPI ISP chip programming with built-in power supply
- Fastest Nokia FBUS flasher
Additional Features:
ATF Professional eMMC Tool 3.0 (APeT 3.0)
- Permanently removes WP bit on all Samsung brand eMMC (first in the world):
- Fixes "Unable to find a bootable option" on Nokia / Microsoft Lumia phones (WITHOUT IMEI AND SIMLOCK DATA LOSS)
- Fixes "eMMC is read only, you cannot update your System" on Huawei phones (WITHOUT IMEI AND SIMLOCK DATA LOSS)
- Field firmware update on selected Samsung brand eMMC:
- Fully repairs eMMC firmware bugs such as:
- No name eMMC "000000" bug
- Read/Write disabled bug
- eMMC firmware Erased/Corrupted bug
- Fully repairs eMMC firmware bugs such as:
Currently supported Samsung eMMC models for Field Firmware Update (FFU):
DO NOT cross flash wrong eMMC model with non-matching part numbers!
This would kill your eMMC 100% and it will become useless and dead.
BGA-169/153
NAME | PART NUMBER | Can be found on... |
---|---|---|
L5U00M | KML5U000HM-B505 | GT-i8262 |
M4G1FB | KLM4G1FE3B-B001 | ZTE U970 / N970 / V970 / U930... |
M8G1WA | KLM8G1WE4A-A001 | GT-i9082, GT-i9082L |
MAG4FB | KLMAG4FE4B-B002 | GT-i747, GT-i747m, GT-i9305, GT-P6800, SCH-i935v, SCH-i535, SGH-T999, SCH-R530, SCH-R530c |
SJS00M | KMSJS000KM-B308 | GT-S5302, GT-S7500, GT-S6500D, Huawei G300... |
VTU00M | KMVTU000LM-B503 | GT-N7100, GT-i9300 |
VUS00A | KMVUS000LA-B304 | GT-N7100, GT-i9300 |
BGA-162
NAME | PART NUMBER | Can be found on... |
---|---|---|
K8U00M | KMK8U000VM-B410 | China Phones |
KJS00M | KMKJS000VM-B309 | SGH-T769 |
NJS00M | KMNJS000ZM-B205 | Huawei G520-0000 |
- Write official Samsung TAR.MD5 files via eMMC connection
- Now you can Repair Boot of any new Samsung phone based on Qualcomm, Exynos, Broadcom, Marvell and Spreadtrum CPUs by just using official Samsung BL flash files.
- Improved eMMC Test Point finder 1.5
- Now supports newest Qualcomm APQ8084 phones (SM-N910F, N9109W, N910A, N915D, N9108V, N9100, G901F)
ATF Professional eMMC Tool 3.0 - no more waiting time for other JTAG/eMMC boxes to support your new Samsung phone *.
Example: You should do the following with unsupported new phone for Boot Repair procedure:
- Disassemble the phone and locate the eMMC pinout using ATF eMMC Test Point finder
- Download official Samsung TAR.MD5 BL flash file or ALL-IN-ONE flash file from the Internet
- Write this flash file via eMMC connection using ATF eMMC tool
- Phone Boot is repaired!
ATF-V3 - All-in-1 Ultimate Adapter For ATF BIG BOX / Nitro / Lighting. This adapter supports JTAG / EMMC / ISP / MMC cards.
ATF-V3 Unique Features:
- ON - Strong PULL-UP resistors will be applied to eMMC CMD (blue) and DATA (green) lines. This is very useful feature for phones that require VccQ and Vcc power connections (Samsung, HTC, etc.)
- OFF - PULL-UP resistors WILL NOT be used. This is normally done with Nokia Lumia phones which do not require VccQ and Vcc connections for a more stable link, set switch to "ON" and make sure to connect required power to VccQ and Vcc lines
- 3.3v - Most of new and old Micro SD cards are compatible with 3.3v Vcc
- 1.8v - With this option future low-powered Micro SD cards would be supported as well
For eMMC Use Only:
- NC - Secondary CLOCK will not be used for eMMC communication*
- CLK2 - Secondary CLOCK will be used for eMMC Communication
*When adapter is used for a NON-EMMC connection such as JTAG or Micro SD card, make sure that DIP switch is set on the "NC" position.
"CLK2" is NOT REQUIRED for most eMMC chips, but setting DIP switch to "CLK2" will give you a stronger CLK (red) signal for better eMMC communication.
Advance Turbo Flasher Gold and ATF-V3 - All-in-1 Ultimate Adapter - Package Content:
- Advance Turbo Flasher Gold Box (ATF Box) – 1 pc.
- ATF Version 3 All-in-1 Adapter for ATF Box – 1pc.
- FPC Ribbon Cable – 2pcs.
- Lumia 510 / 610 Connector – 1pc.
- Molex Port for Lumia 610/510 – 1pc.
- BGA PCB 153/169 – 1pc.
- BGA PCB 182/186 – 1pc.
- Testpoint Finder Probe Wire – 1pc.
- Copper Wire 0.1 mm – 1pc.
- Cellphone Opening Kit – 1 set.
Due to the onrush of technology and efforts to meet market demands, we retain the right to change the list of included cables and accessories. More details are available from our sales managers.
First Start
After you receive the box, you have to register it.
Please download the latest version of ATF_Full_Installer
Connect the box to your PC and install the drivers, you can find them in the folder with installed software ...\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS
If you installed the box correctly, then your PC should recognize it as AdvanceBox Programming Port + AdvanceBox Turbo Flasher
Turn your antivirus and firewall off and run AdvanceBox.exe
Open "Product Support" section in the software, choose "Box Tools"
Add on registration form your personal details, select "Country - Worldwide", "Reseller - GSMServer", as shown on the screenshot and press "Activate Box"
Now your box is registered and you will be able to add already pre-activated JTAG and ATF Network Activations.
To add JTAG activation please follow this manual.
To add ATF Network activation - open "ATF Network Section" and press "Login to your ATF Network Account"
Now your box is completely activated.
If you have any questions please write us to techsupport@gsmserver.com
* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.
Box is compatible with the following models of Cell phones |
|