This adapter will expand possiblities of your ICFRIEND EMMC / UFS set.
Availability in stock:
HK
ID: 899147 0.005 kg
Credits and Activations ICFriend
Shown 20 out of 753 results
ICFriend
Reset
Sort by:
Popularity
Price up
Price down
Name A-Z
Name Z-A
Popularity
Items per page:
24
24
48
96
192
ID: 908098
ICFRIEND NB EMMC BGA 13 in 1
USD 110.00
Intended for direct EMMC memory chips connection with the wide range of supported BGA types.
Availability in stock:
HK
ID: 908098 0.4 kg
ID: 920146
ICFRIEND Easy UFS 3 in 1
USD 299.00
ICFRIEND Easy UFS 3 in 1 is intended for Z3X Easy JTAG Plus Box and allows you to read / write data on the UFS BGA153, UFS / EMMC BGA254, UFS BGA297 chipsets.
Availability in stock:
HK
ID: 920146 0.3 kg
ID: 920147
ICFRIEND Easy UFS 6 in 1
USD 265.00
ICFRIEND Easy UFS 6 in 1 is intended for Z3X Easy JTAG Plus Box and allows you to read / write data on the UFS chipsets (BGA153, BGA254, BGA297).
Availability in stock:
HK
ID: 920147 0.3 kg
MiPi Tester eMMC / UFS ISP Adapter allows you to service any device with ISP pinouts via UFS/eMMC interface. Intended for Easy UFS kits and Z3X Easy Jtag Plus.
Availability in stock:
HK
ID: 922335 0.1 kg
This adapter allows you to connect to devices with ISP pinouts via the UFS and EMMC interfaces.
Availability in stock:
HK
ID: 924222 0.01 kg
This ISP Adapter is intended for the Flash 64 programmer. Manufactured by ICFRIEND.
Availability in stock:
HK
ID: 927074 0.025 kg
This kit is intended for seamless ISP programming of UFS and eMMC chips (reading / writing firmware, data recovery).
Availability in stock:
HK
ID: 927566 0.15 kg
This kit is designed for low-level work with smartphone memory chips via the MiPi ISP interface without soldering.
Availability in stock:
HK
ID: 927567 0.25 kg
ID: 927569
Easy JTAG UFS 4.0 Adapter
USD 10.00
The EasyJtag UFS4.0 Adaptor is designed to optimize the programmer's efficiency and reduce the risk of errors during data reading / writing.
Availability in stock:
HK
ID: 927569 0.01 kg
This EMMC UFS NB2 adapter allows you to work with UFS and EMMC interfaces using Easy JTAG, Medusa, and UFI programmers.
Availability in stock:
HK
ID: 928311 0.05 kg
ICFriend Easy UFS BGA 254 ISP Adapter is intended for Easy UFS kits and Z3X Easy Jtag Plus.
Availability in stock:
HK
ID: 928904 0.1 kg
MiPi EMMC UFS ISP Adapter + F64 ISP Adapter Board + NB-UFS-5IN1 (254 / 153 / 297) Adapter + ISP Cable
Availability in stock:
HK
ID: 930129 0.2 kg
MiPi F64 ISP Adapter Board + NB-UFS-5IN1 (254 / 153 / 297) Adapter + ISP Cable
Availability in stock:
HK
ID: 930130 0.25 kg
New
ID: 931828
ICFriend Adapter for Easy Jtag BGA 254 with UFS ISP Cable (8 Pin Socket Support)
USD 10.00
This kit allows you to easily connect the Z3X Easy-Jtag BGA-254 socket to the phone`s memory chip with minimal setup required and ensure stable and reliable connection for advanced repair tasks.
Availability in stock:
HK
ID: 931828 0.045 kg
New
ID: 931829
ICFriend Adapter for Easy Jtag BGA 254 with UFS ISP Cable (9 Pin Socket Support)
USD 11.00
This kit allows you to easily connect the Z3X Easy-Jtag BGA-254 socket to the phone`s memory chip with minimal setup required and ensure stable and reliable connection for advanced repair tasks.
Availability in stock:
HK
ID: 931829 0.045 kg
MiPi Tester eMMC / UFS ISP Adapter allows you to service any device with ISP pinouts via UFS/eMMC interface. Intended for Easy UFS kits and Z3X Easy Jtag Plus.
ID: 922239 0.03 kg
MiPi Tester UFS/eMMC ISP S2 allows you to service any device with ISP pinouts via UFS/eMMC interface. Intended for MiPi Box.
ID: 927568 0.01 kg
ICFriend Easy UFS ISP Adapter allows you to connect to devices with ISP pinouts via the UFS interface.
ID: 928905 0.015 kg
MiPi Tester eMMC / UFS ISP Adapter allows you to service any device with ISP pinouts via UFS/eMMC interface. Intended for Easy UFS kits and Z3X Easy Jtag Plus.
ID: 930406 0.05 kg
Compare
No items in compare list
Compare
