Repair Equipment

4 channel Super Phosphor Oscilloscop with a 200 MHz bandwidth, a sample rate of 2 GSa/s, a maximum memory depth of 200 MB and a 10.1" display.

Measuring AC/DC voltage, AC/DC current, capacitance, frequency, period, temperature, connectivity test, diode test. 4.3-inch TFT color LCD.

2 channel waveform generator with a frequency range of 1 µHz to 200 MHz with 2.4 GSa/s sampling rate (16 bit) and 20 Mpts memory. Bandwidth: 200 MHz.

USB microscope with 4MP HD sensor, HDMI output, 7-inch adjustable display, and up to 270x magnification. Equipped with remote control.

Used to measure DC low resistance through 4-wire method. Unknown wire length calculation (FT/M); two-way data transmission by USB interface.

A tool used to measure displacement (1~1999 μm), velocity (0.1~199.9 mm/s), and acceleration of rotating and reciprocating machinery (0.1~199.9m/s²).

Handheld battery powered instrument, designed for identifying phase sequence, missing phase and motor rotation direction.

A digital tachometer for rotation speed measurements within 10-99999 range.

Weatherproof industrial dual-lens endoscope with a 4.3" LCD display, 2MP 1920×1080 HD camera, 9 adjustable LEDs, and a 178° ultra-wide viewing angle

Replacement knife soldering iron tip for lead-free precision component soldering. It is compatible with Goot RX-802AS/RX-812AS/RX-822AS, Accta 501.

AS-111 is the separator machine with built-in vacuum pump. Use for LCDs up to 11.1".

Chisel type soldering tip (length 12 mm, diameter 3.2 mm). Compatible with QUICK-202/202D ESD, QUICK-303/303B ESD soldering stations.

Double-sided adhesive tape perfectly suitable for touchscreen and display sticking.

Knife type replacement soldering iron tip (length 12 mm, diameter 3.0 mm, 45°) for precision component soldering. It is compatible with QUICK-202/202D ESD, QUICK-303/303B ESD soldering stations.

Car power inverter is used to connect the devices designed for 7.5 V power supply to the car electrical circuit.

Resolution for the DP700 series power supplies which increases the technical characteristics of the device.

Thermal protective tape for soldering (10 mm).

Professional kit consisting of 4 stainless steel tools for fast and convenient trim panel and car interior elements removal (dashboard items, radios, door cards, moldings, etc).

Heat removal clips (2 pcs.: 68 mm, 70 mm) designed for protecting components from excess heat from soldering iron.