Fusion Splicer Fujikura 70S
id: 855676
Made in Japan
18.5 kg 110, 220 V Warranty: 24 months
Core-to-core alignment single fiber splicer designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing time: 7 s, heating time: 14 s. Read more
Fujikura 70S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing takes only 7 seconds, and heating takes only 14 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 110/220 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
- Splices all known types of fibers.
- Fiber core alignment.
- Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
- Reduced splicing time – 7 seconds only.
- Heating time – 14 seconds only.
- Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
- Battery life increased up to 200 full splicing/heating cycles.
- Rotary color anti-glare LCD 4.73", high contrast and vividness.
- Simultaneous display of X and Y axes.
- May splice SC, LC, MPO connectors.
- Automatic: wind-protective lid, heater, fiber holders.
- Increased water, dust and shock resistance, may be used under severe environment conditions.
- Automatic arc calibration.
- Battery BTR-09 is included.
- New comfortable carrying case, optimized for quick operation start.
- The case may be used as a working table.
- Operation manual is installed into the splicer.
- Software update option.
- 2 years of full warranty with the device replacement.
Technical Specifications
Fujikura 70S |
||
Splicing / Heating | ||
---|---|---|
Typical Splicing Time | 7 sec (for SM) | |
Typical Heating Time | 14 sec (for 60 mm sleeves) | |
Applicable Fibers | SMF (ITU-T G.652) MMF (ITU-T G.651) DSF (ITU-T G.653) NZDSF (ITU-TG.655) CSF (ITU-T G.654) Fiber with low sensitivity to bends (ITU-T G.657) Erbium-doped fiber |
|
Cladding Diameter | 80 μm – 150 μm | |
Coating Diameter | 100 μm – 1,000 μm | |
Fiber Cleave Length | 5 – 16 mm | |
Typical Average Splice Loss | 0,02 dB (SMF) 0,01 dB (mmF) 0,04 dB (DSF) 0,04 dB (NZDSF) |
|
Splice Loss Estimate | core angular offset fiber deformation |
|
Return Loss | ≤60 dB | |
Compatible Protection Sleeves | 60 mm 40 mm micro |
|
Splicing Modes | 100 user programmable | |
Heating Modes | 30 (10 preset + 20 user programmable) | |
Internal Memory | up to 2000 splice results and parameters | |
Additional Options | ||
Mechanical Proof Test | stretching force 1.96 – 2.25 N | |
Electrodes lifetime | 3000 cycles | |
External Interfaces | USB 1.1, Mini-DIN | |
Data Display | ||
Screen type | rotary anti-glare LCD | |
Screen Size | 4.73" | |
Colour | Yes | |
Viewing | Yes (2 CMOS cameras) | |
Magnification | х200 | |
Power Supply | ||
Adapter ADC-19 | 110/220 V AC | |
Battery BTR-09 | 4000 mAh | |
Battery Cycles | up to 200 splicing/heating cycles | |
Operation Conditions | ||
Temperature | –10 ~ +50°C | |
Altitude above sea level | 0 ~ 5000 m | |
RH | 0 ~ 95% | |
Max. wind velocity | 34 mph / 15 m/s | |
Storage Conditions | ||
Temperature | –40 ~ +80 °C | |
RH | 0 ~ 95% | |
Protection | ||
Shock Resistance | height: 76 cm, any surface | |
Dust Resistance | dust particles from 0.1 to 500 μm | |
Rain Resistance | 10 mm/h for 10 min | |
Dimensions & Weight | ||
Width | 150 mm | |
Length | 159 mm | |
Height | 146 mm | |
Weight | 2,5 kg (with adapter ADC-18) 2,7 kg (with battery BTR-09) |
Additional Information
Download Fujikura 70S Data Sheet.
Download Fujikura 70S Operating Manual.
Video
Package Contents
- Fusion Splicer Fujikura 70S — 1 pc.
- Fiber Optic Cleaver Fujikura CT-06A — 1 pc.
- Detachable Battery BTR-09 — 1 pc.
- Battery charge cord DCC-18 — 1 pc.
- Power adapter/Charger adapter ADC-18 — 1 pc.
- Power cord ACC-XX — 1 pc.
- Spare electrodes
- USB cable USB-01 — 1 pc.
- J-plate JP-05 — 1 pc.
- Alcohol dispenser AP-01 — 1 pc.
- Screwdriver SD-01 — 1 pc.
- CD with Data Connection Software and Video Instruction Manual — 1 pc.
- Short guide — 1 pc.
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.