Adapters

This Test Socket Adapter For UFI-Box allows to test EMMC/EMCP Socket (169-FBGA,153-FBGA,162-FBGA,186-FBGA).

JC Pro 1000S 32/64 Bit NAND Module is a new JC Pro 1000S PCIE module able to work on JC software platform and on JC Pro1000S programmer.

JC Pro 1000S Module for iPhone 8 / 8 Plus / X is a new JC Pro 1000S PCIE module able to work on JC software platform and on JC Pro1000S programmer.

Naviplus PRO 3000S 2 in1 Adapter for iPad 5 Air / iPad 6 Air 2

Easy 5 / 6 for iPad 5 Air / iPad 6 Air 2 NAND Fixture allows you to work with iPad Air / Air 2 without removing NAND flash memory.

Naviplus PRO 3000S Adapter for iPhone 8 / 8 Plus / X allows you to read the firmware data of the original screen and write the information to the replacement screen.

This UFS BGA-153 Socket Adapter is intended for Medusa Pro II Box

This Test Socket Adapter For UFI-Box allows to test EMMC/EMCP Socket (221-FBGA) BGA221.

This PCB board is intended for JC V1 Programmer and allows you to service iPhone 11 / 11 Pro as well.

UFI ISP Adapter V2 is intended for UFI-Box.

This is a set of adapters that is compatible with UFI-Box and EMMC Dongle. Supported BGA types: BGA153, BGA169, BGA162, BGA186

This UFS BGA-254 Socket Adapter is intended for Medusa Pro II Box

Hydra ISP Adapter Set allows you to service any device with eMMC and ISP pinouts available.

Module for JC Pro1000s programmer for reading/writing dot matrix data on iPhone X, iPhone XS / XR / XS Max, iPhone 11 / 11 Pro, iPad A12X.

Intended for testing / reading / writing fingerprint sensor data on iPhone.

This ISP Adapter set is intended for Z3X Easy-Jtag box, UFI box, and Medusa box.

Intended for reading/writing/erasing NAND data via soldering.

This adapter will expand possiblities of your ICFRIEND EMMC / UFS set.

Allows the owners of Medusa Pro / Octoplus Pro Box to work with Androidking AK-BGA eMMC adapter sets.

JC CBL-1 allows you to identify if a MFI Lightning cable is original or imitated in 1 second.

Magic AWRT Adapter is intended for solving service problems with iWatch SE/S1/S2/S3/S4/S5/S6 (38 mm / 42 mm / 40 mm / 44 mm)

QianLi iSocket is intended for after-repair testing of mother board of iPhone X / XS / XS Max. Time saver and a handy tool for anyone dealing with iPhone hardware repair

QianLi iSocket is intended for after-repair testing of mother board of iPhone 11 / 11 Pro / 11 Pro Max. Time saver and a handy tool for anyone dealing with iPhone hardware repair

Solves the problem with True Tone and Face ID caused by not original FPC flex cable on iPhone 8 / 8 Pro / X / XR / XS /XS Max / 11 / 11 Pro / 11 Pro Max / 12 / 12 Pro / 12 Pro Max. Works together with JC Pro1000S programmer.