LCD Module Gluing Machine AS 1518, (for LCDs up to 7", autoclave )
id: 858528
26 kg 220 V Warranty: 6 months
This device is used for LCD module gluing. Read more
Technical Specifications
Voltage | 110/220 V |
Temperature range | 0-400 °C |
Diameter | 150 mm |
Depth | 180 mm |
Hose diameter for compressor connection | 8 mm |
Maximum pressure | 9 Bar |
Device size | 300х250х300 mm |
Note! The compressor is not included in the package.
Operating Principles
- Connect the compressor to the device.
- Open the chamber door, put the display module there, close the door.
- Press the red Power button to turn the device on.
- Set the temperature of 40-60 °C. The temperature settings depends on the model of the display module.
- Turn the compressor on and set the pressure of 7 Bar.
- Set the time (approximately 15-30 min) depending on the amount of air bubbles.
- Press the green Start button to launch the gluing process.
- Warning! Do not open the device when it is working under pressure!
- When the gluing process is finished, the device automatically will release pressure. If it didn't happen, then turn the black rotary switch to the right to the Exh mark.
- The display and the glass are bonded. Now the LCD module can be installed in a cell phone, smartphone or tablet.
Package Contents
- Device — 1 pc.
- Power cable — 1 pc.
- Filter for compressor — 1 pc.
- Metal stand — 1 pc.
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
LCD Module Gluing Machine is compatible with the following models of Cell phones |
|
Characteristics |
|