LCD Module Gluing Machine VP 203L, (vacuum, for LCDs up to 13", with vacuum pump)
id: 858518
80 kg 220 V Warranty: 6 months
This device is recommended to be used for gluing a glass to a display module with the help of OCA film. Read more
Technical Specifications
Voltage | 110/220 V |
Temperature range | 0-400 °C |
Platform size | 200x300 mm |
Device size | 400x500x580 mm |
Control panel diagonal | 4,3" |
You need to buy the compressor separately.
Operating Principles
- Connect the compressor to the device.
- Connect vacuum pump hose and power to the device.
- Open the chamber door, put the display module there, close the door.
- Press the red Power button to turn the device on.
- Set the temperature of 40-60 °C. The temperature settings depend on the model of the display module.
- Turn the compressor on and set the pressure of 4-6 Bar.
- Set the time (approximately 3-6 min) depending on the amount of air bubbles.
- Press the green Start button to launch the gluing process.
- Warning! Do not open the device when it is working under pressure!
- The vacuum pump will be turned on automatically.
- When the gluing process is finished, the device will release the pressure and the platform will automatically slide out.
- The display and the glass are now bonded. Now the LCD module can be installed in a cell phone, smartphone or tablet.
Package Contents
- Device — 1 pc.
- Power cable — 1 pc.
- Filter for compressor — 1 pc.
- Vacuum pump — 1 pc.
- Silicone pad — 1 pc.
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
LCD Module Gluing Machine is compatible with the following models of Tablets |
|
Characteristics |
|
Package contents |
|