Phone Tester Pro'sKit MT-8100
id: 823539
0.9 kg Warranty: 6 months
Line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialing, low battery indicator and a rugged locking belt clip. Read more
Inform of price reduction
Pro'sKit MT-8100 phone tester is used by installers and repair technicians to test copper wire voice subscriber lines. Pro'sKit MT-8100 phone tester is easy to use, features line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialing, low battery indicator and a rugged locking belt clip.
Pro'sKit MT-8100 Phone Tester User Manuals
Download Pro'sKit MT-8100 phone tester user manual
Pro'sKit MT-8100 Phone Tester Features
- Dust- and waterproof, drop protection
- Outer-lead voltage, battery low voltage and continious polarity LED indicators
- On/off checking feature for telecom line connections
- Speakerphone for convenient hands-free two-way conversation
- Tone and pulse operation
- Store up to twelve 16-digit numbers in repeat dialer (speed dialing), plus extra number store in M1 button
- Last number redial feature
- PBX pause button and mute switch
- Electronic switch for speakerphone/monitor volume control
- Automatic shut-off after five minutes of inactivity
- Relocatable steel locking belt clip
- Audible electronic ringer
- Angled bed of nails for stabbing into the cable, and the auxiliary RJ-11 modular plug for direct insertion into telecom jack
Pro'sKit MT-8100 Phone Tester Technical Specifications
Loopspan limit |
2 kΩ maximum at 48 V DC (nominal 20 mA minimum loop current) |
DC resistance | |
---|---|
Talk mode | 300 Ω typical |
Monitor impedance | 39 kΩ nominal at 1 KHz |
Rotary dial output | |
Pulsing rate | 10 pps + 0.8 pps |
Percent break | 61%±2% |
Interdigit interval | 1000 ms typical |
Leakage during break | >50 KΩ |
DTMF output | |
Tone frequency error | ±1.2% maximum |
Tone level | -8±2 dBm combined (typical) |
High versus low tone difference | 4 dB maximum |
Memory dialing | |
Memory capacity | 13 memories including M1, last number redialing |
Digit capacity | 16 digits per memory |
PBX pause duration | 4 seconds |
Line voltage test | 5 phase AC/DC voltage indication |
Monitor amplifier power source | 9 V transistor; provides 25 hours continuous use, typical |
Automatic power shut off | after 5 min. of no audio signal |
Speaker phone levels | electronic adjustable |
Power source | battery (9V) 6F22 (not included) |
Physical characteristics | |
Measurement |
230 × 82 × 89 mm (9-1/16” × 3-15/64” × 3-1/2”) |
Weight | 635 g typical |
Water resistance | dust protection & waterproof tested to an IEC/EN 60529 IP54 rating |
Cord sets | angled bed of nails and RJ11 plug |
Environmental conditions | |
Temperature | operating: 0 to 50°C |
storage: <-10 to 60°C | |
Relative humidity | 5 to 95% |
Certificate | IP54, CE approved |
Pro'sKit MT-8100 Phone Tester Package
- Butt set tester (1 pc.)
- Line cord with angled bed of nails and RG-11 plug (1 pc.)
- Replacement fuse (2 pcs.)
- User's manual (1 pc.)
Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from gsmserver.com web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.