RIFF Box 2 + Accta 301 (220V)
RIFF Box 2 has been released!
After six successful years since the first RIFF Box hardware was released, we are introducing a new RIFF Box 2 hardware. Developers did their best to develop a reliable, marvelous, yet functional device.
RIFF Box 2 hardware is designed to accommodate a large variety of communication protocols.
RIFF Box 2 – Hardware Specification:
- Dual-core Cortex-M4 MCU @ 204MHz
- PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
- Box to Device (Host) Speed: Full-Speed (48 Mbps)
- SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
- UART Interface
- RIFF™ Smart Probing Feature
- Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
- 4 fixed 3.3V GPIO Lines
RIFF Box 2 - Interface Specifications:
- 20-Pin Male Connector:
- JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
- SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
- 30-Pin Male Connector:
- SD/MMC Interface 1/4Bit @ 52MHz
- Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
- USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
- USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
- RJ-45 Connector:
- 6.1 RIFF™ Smart Probing Feature
- 6.2 UART Port
- 6.3 4 Fixed 3.3V GPIO Lines
RIFF Box 2 - Supported SD/MMD Revisions:
Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
RIFF Box 2 - Supported JTAG Cores *:
- ARM7
- ARM920
- ARM926
- ARM946
- ARM7EJS
- ARM11
- CORTEX-A5
- CORTEX-A8
- CORTEX-A9
- CORTEX-A15
- OMAP3430
- OMAP3630
- OMAP4430
- TEGRA2 (CORTEX-A9)
- TEGRA2 (ARM7)
- QUALCOMM S3 (ARM7, ARM11, SCORPION)
- QUALCOMM S4 (ARM7, ARM11, SCORPION)
- NOVATHOR
- PXA270
- PXA312
- MIPS32™ IR5Bit
- MIPS32™ IR8Bit
RIFF Box 2 - Software:
- RIFF JTAG Manager
- RIFF Remote helper
- RIFF Admin client / SN reader
- RIFF Box USB drivers
New software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10-based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.
RIFF Box 2 - Package Content:
- Riff Box 2 – 1 pc.
- Flat Cables – 3 pcs.
Accta 301 – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hor air gun and soldering iron holders, a soldering iron tip and hot air nozzles.
Features
- Ultra-compact device.
- Microprocessor control system.
- Real-time temperature display.
- Allows temperature monitoring when the tip touches with the surface.
- Temperature parameters control using analog adjusting potentiometers.
- Hot air gun overheating protection.
- Soldering iron temperature accuracy ±5 °C.
- Soldering iron linear temperature characteristic.
- Soldering iron heat-up time up to 12 seconds.
- Hot air gun auto switch-off.
- Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
- The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
- CE certified.
Technical Specifications
Power Consumption | 450 W |
Soldering Iron Power | 50 W |
Hot Air Gun Power | 350 W |
Soldering Iron Temperature Range | 80 – 480 °C |
Hot Air Gun Temperature Range | 80 – 480 °C |
Soldering Iron Heating Element | ceramic |
Hot Air Gun Heating Element | metal heating core |
Air Pump Type | turbine blower |
Air Capacity | 120 l/min |
Power Input | 220-240 V, 50 Hz |
Main Unit & Hot Air Gun Holder Size | 190 × 194 × 103 mm |
Main Unit Size (without holder) | 128 × 194 × 100 mm |
Weight | 2.3 kg |
The default plug type is EU plug Type F (CEE 7/7). In case you need a different plug please contact our manager.
Video
Package Contents
- Accta 301 Hot Air Rework Station – 1 pc.
- Hot Air Gun Holder – 1 pc.
- Hot Air Nozzles – 3 pcs.
- Soldering Iron – 1 pc.
- AOYUE T-I Soldering Tip – 1 pc.
- Soldering Iron Holder – 1 pc.
- Tip Cleaning Sponge – 1 pc.
- User's Manual – 1 pc.
Compatible Soldering Tips
Conical Soldering Tips | ||
---|---|---|
AOYUE T-0.5C |
AOYUE T-0.8C |
AOYUE T-B |
AOYUE T-I |
AOYUE T-LB |
AOYUE T-S4 |
AOYUE T-S8 |
AOYUE T-SB |
AOYUE T-SI |
Bevel Type Soldering Tips | ||
AOYUE T-1C |
AOYUE T-1.5CF |
AOYUE T-1.5CM |
AOYUE T-2C |
AOYUE T-2CF |
AOYUE T-2CM |
AOYUE T-3C |
AOYUE T-3CF |
AOYUE T-3CM |
AOYUE T-4C |
AOYUE T-4CF |
AOYUE T-4CM |
AOYUE T-S6 |
AOYUE T-S7 |
|
Chisel Type Soldering Tips | ||
AOYUE T-0.8D |
AOYUE T-1.2D |
AOYUE T-1.2LD |
AOYUE T-1.6D |
AOYUE T-2LD |
AOYUE T-2.4D |
AOYUE T-3.2D |
AOYUE T-3.2LD |
AOYUE T-S3 |
AOYUE T-S9 |
||
Bent Type Soldering Tips | ||
AOYUE T-0.2RB |
AOYUE T-1.8H |
AOYUE T-H |
Knife Type Soldering Tips | ||
AOYUE T-K |
||
Soldering Tips for SMD | ||
AOYUE T-R |
AOYUE T-RT |
Manufacturer
This device was developed and manufactured in Ukraine.
Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our sales managers.
* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.
Box is compatible with the following models of Cell phones |
|